Table of Contents
The Ram TRX is a powerful truck that has captured the hearts of performance enthusiasts. One of the best ways to enhance its performance is by installing a supercharger. This guide will walk you through the process of installing a Whipple 2.9L supercharger to achieve over 750 horsepower.
Tools and Equipment Needed
- Socket set
- Torque wrench
- Ratchet and extensions
- Wrenches
- Screwdrivers
- Supercharger installation kit
- Coolant and oil
- Safety glasses and gloves
Preparation Steps
Before starting the installation, it is essential to prepare your workspace and gather all necessary tools and equipment. Ensure the Ram TRX is parked on a level surface and the engine is cool.
Disconnect the Battery
For safety, disconnect the negative terminal of the battery to prevent any electrical issues during installation.
Remove Engine Covers
Remove any engine covers to gain access to the engine components. This may require unscrewing or unclipping various fasteners.
Removing the Stock Supercharger
With the engine exposed, the next step is to remove the stock supercharger. This involves several steps to ensure a smooth transition to the new Whipple supercharger.
Drain Coolant
Start by draining the coolant from the system. Locate the drain valve on the radiator and allow the coolant to flow into a suitable container.
Remove the Stock Supercharger
Carefully disconnect any hoses and electrical connectors attached to the stock supercharger. Use the socket set to remove the bolts securing the supercharger to the engine.
Installing the Whipple 2.9L Supercharger
Once the stock supercharger is removed, it’s time to install the Whipple 2.9L supercharger. Follow these steps for a successful installation.
Prepare the New Supercharger
Unbox the Whipple 2.9L supercharger and ensure all components are included. Review the installation manual provided by Whipple for specific instructions and torque specifications.
Install the New Supercharger
Position the new supercharger onto the engine and align it with the mounting holes. Secure it in place using the bolts provided in the installation kit. Make sure to follow the torque specifications outlined in the manual.
Connecting Hoses and Electrical Components
After securing the supercharger, the next step is to reconnect all hoses and electrical components. This is crucial for the supercharger to function correctly.
Reconnect Hoses
Reconnect any vacuum hoses, coolant hoses, and other connections that were detached during the removal of the stock supercharger. Ensure all connections are tight to prevent leaks.
Reconnect Electrical Connectors
Reconnect any electrical connectors to the supercharger. Make sure they are securely attached to ensure proper functionality.
Final Steps
With the supercharger installed and all connections made, it’s time to complete the final steps before starting the engine.
Refill Coolant
Refill the coolant system with the appropriate coolant. Check for any leaks around the hoses and connections.
Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure it is tight and secure before proceeding.
Start the Engine
Start the engine and let it idle for a few minutes. Check for any unusual noises or leaks. If everything sounds good, take the truck for a test drive to experience the enhanced performance.
Conclusion
The installation of a Whipple 2.9L supercharger on your Ram TRX can significantly boost its horsepower and overall performance. By following this guide, you can successfully install the supercharger and enjoy the thrilling power it brings to your truck.