Ram Trx Supercharger Upgrade Installation Guide: Boosting 6.2l with Vortech V-3 Si-trim

by

The Ram TRX is a beast in the world of trucks, boasting a powerful 6.2L supercharged HEMI V8 engine. However, for those looking to push the limits even further, upgrading to a Vortech V-3 Si-trim supercharger can provide the extra boost needed for enhanced performance. This guide will walk you through the installation process of the Vortech supercharger upgrade.

Tools and Materials Needed

  • Vortech V-3 Si-trim supercharger kit
  • Socket set
  • Wrenches
  • Torque wrench
  • Scissors or a knife
  • Electrical tape
  • Vacuum line
  • Coolant
  • Oil for supercharger
  • Safety glasses

Preparation Steps

Before diving into the installation, it’s crucial to prepare your workspace and the vehicle. This ensures a smooth installation process.

  • Ensure the vehicle is parked on a level surface.
  • Disconnect the battery to avoid any electrical issues.
  • Remove any engine covers or components obstructing access to the engine.
  • Gather all tools and materials in one place.

Removing the Stock Supercharger

The first major step in the installation process is to remove the stock supercharger. Follow these steps carefully:

  • Remove the intake ducting connected to the stock supercharger.
  • Disconnect all electrical connectors and vacuum lines from the stock unit.
  • Unbolt the stock supercharger from the engine using the socket set.
  • Carefully lift the stock supercharger off the engine and set it aside.

Installing the Vortech V-3 Si-trim Supercharger

With the stock supercharger removed, you can now install the Vortech V-3 Si-trim supercharger. Follow these steps:

  • Place the Vortech supercharger in position and align it with the mounting holes.
  • Secure the supercharger using the provided bolts and a torque wrench to ensure proper tightness.
  • Reconnect any electrical connectors and vacuum lines that were disconnected earlier.
  • Install the new intake ducting that comes with the Vortech kit.

Connecting the Oil Supply Line

The Vortech supercharger requires an oil supply line for lubrication. Follow these steps to connect it:

  • Locate the oil supply fitting on the Vortech supercharger.
  • Attach the oil supply line securely using the appropriate fittings.
  • Ensure there are no leaks by checking the connections thoroughly.

Adding Coolant and Oil

Before starting the engine, it’s essential to add coolant and oil to the supercharger:

  • Fill the Vortech supercharger with the recommended oil until it reaches the proper level.
  • Add coolant to the engine to ensure optimal operating temperature.

Final Checks

Before starting your truck, perform these final checks:

  • Double-check all connections for tightness and security.
  • Ensure there are no tools left in the engine bay.
  • Reconnect the battery.

Starting the Engine

Now it’s time to start the engine and test your installation:

  • Turn the ignition key and start the engine.
  • Listen for any unusual noises that may indicate an issue.
  • Check for leaks around the supercharger and oil supply line.

Tuning the Engine

After installation, tuning the engine is crucial to maximize performance:

  • Consult a professional tuner to adjust the engine parameters.
  • Ensure the air-fuel mixture is optimized for the new supercharger.

Conclusion

Upgrading your Ram TRX with a Vortech V-3 Si-trim supercharger can significantly enhance performance and driving experience. By following this installation guide, you can successfully install the supercharger and enjoy the added power it brings to your truck.