Ram TRX Supercharger Upgrade Installation Guide: Replacing Your Stock 2.4L with a 2.65L Whipple System

The Ram TRX is known for its impressive performance and rugged capabilities. However, for enthusiasts looking to push the limits further, upgrading the supercharger can unlock additional power and efficiency. This guide will walk you through the installation process of replacing the stock 2.4L supercharger with a 2.65L Whipple system.

Tools and Materials Needed

• 2.65L Whipple Supercharger Kit
• Socket set (metric and standard)
• Torque wrench
• Ratchet and extensions
• Flathead and Phillips screwdrivers
• Pliers
• Engine oil
• Coolant
• Shop towels
• Safety glasses
• Gloves

Preparation Steps

Before beginning the installation, it’s crucial to prepare your vehicle and workspace. Follow these steps to ensure a smooth process:

• Park the vehicle on a level surface and engage the parking brake.
• Disconnect the battery to prevent any electrical shorts.
• Remove any engine covers or components obstructing access to the supercharger.
• Gather all tools and materials needed for the installation.

Removing the Stock Supercharger

To install the new Whipple supercharger, you must first remove the stock 2.4L unit. Follow these steps:

• Remove the intake ducting connected to the supercharger.
• Disconnect any electrical connectors attached to the supercharger.
• Unbolt the supercharger from the intake manifold using the socket set.
• Carefully lift the supercharger off the engine and set it aside.

Installing the 2.65L Whipple Supercharger

Now that the stock supercharger is removed, you can proceed with the installation of the 2.65L Whipple supercharger. Follow these steps:

• Clean the mating surface on the intake manifold to ensure a proper seal.
• Place the new Whipple supercharger onto the intake manifold, aligning it with the mounting holes.
• Secure the supercharger with the provided bolts and torque them to the manufacturer’s specifications.
• Reconnect any electrical connectors that were previously disconnected.
• Reattach the intake ducting to the supercharger.

Finalizing the Installation

Once the Whipple supercharger is installed, it’s time to finalize the installation. Follow these steps:

• Check all connections and ensure everything is secure.
• Reconnect the battery.
• Fill the engine with oil if necessary and check coolant levels.
• Start the engine and let it idle for a few minutes while checking for leaks.
• Take the vehicle for a short test drive to ensure proper operation.

Conclusion

Upgrading to a 2.65L Whipple supercharger can significantly enhance the performance of your Ram TRX. With careful preparation and following this installation guide, you can enjoy the benefits of increased power and efficiency. Always consult the manufacturer’s instructions for specific details related to your supercharger kit.