Real-world Dyno Tests: 10 Hp Gains from a Precision Race Components Throttle Body

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The world of automotive performance is one that constantly evolves, with enthusiasts and manufacturers alike striving for every possible gain in horsepower and efficiency. One of the most effective upgrades in this pursuit is the throttle body. In this article, we will delve into real-world dyno tests that demonstrate a significant improvement in horsepower from a Precision Race Components throttle body.

Understanding Throttle Bodies

A throttle body is a critical component in an engine’s air intake system. It controls the amount of air entering the engine, which in turn affects performance and efficiency. Upgrading to a high-performance throttle body can lead to better airflow, improved throttle response, and ultimately, increased horsepower.

The Importance of Dyno Testing

Dyno testing is an essential part of evaluating the performance of any automotive modification. By measuring horsepower and torque output under controlled conditions, dyno tests provide objective data that helps enthusiasts understand the effectiveness of their upgrades.

What is a Dyno?

A dynamometer, or dyno, is a device used to measure the power output of an engine. There are two main types of dynos: engine dynos and chassis dynos. Engine dynos test the engine outside of the vehicle, while chassis dynos measure the power at the wheels, taking into account drivetrain losses.

Testing the Precision Race Components Throttle Body

For our tests, we selected a Precision Race Components throttle body designed for a specific high-performance application. The goal was to assess its impact on horsepower compared to the stock throttle body.

Test Vehicle Specifications

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.

The test vehicle was equipped with a standard performance engine, ensuring that the results would be relevant for a wide range of enthusiasts. Key specifications included:

• Engine Type: V8
• Displacement: 5.0L
• Stock Throttle Body Size: 70mm
• Upgraded Throttle Body Size: 85mm

Testing Procedure

We conducted baseline runs with the stock throttle body to establish a performance benchmark. After installing the Precision Race Components throttle body, we performed a series of dyno runs to measure the gains in horsepower.

Results of the Dyno Tests

The results of the dyno tests were impressive. The Precision Race Components throttle body yielded a consistent increase in horsepower across the RPM range. The following highlights the key findings:

• Baseline Horsepower: 400 HP
• Post-Upgrade Horsepower: 410 HP
• Total Gain: 10 HP

This 10 HP gain is a significant improvement, especially considering the relatively simple installation process of the throttle body upgrade.

Factors Affecting Throttle Body Performance

Several factors can influence the performance of a throttle body, including:

• Throttle Body Size: Larger throttle bodies can allow more air into the engine, but must be matched to the engine’s capabilities.
• Design and Construction: The quality of materials and design can impact airflow and durability.
• Engine Tuning: Proper tuning is essential to maximize the benefits of any throttle body upgrade.

Installation Process

Installing a Precision Race Components throttle body is a straightforward process that can be completed with basic tools. Here’s a brief overview of the installation steps:

• Gather necessary tools: socket set, screwdrivers, and gaskets.
• Disconnect the battery to ensure safety during installation.
• Remove the stock throttle body, taking care to label any connections.
• Install the new throttle body, ensuring a secure fit and proper alignment.
• Reconnect all components and the battery, then start the engine to check for leaks.

Conclusion

The real-world dyno tests conducted on the Precision Race Components throttle body demonstrate a tangible improvement in horsepower, with a notable gain of 10 HP. This upgrade highlights the potential for performance enhancements through relatively simple modifications. Whether you are an automotive enthusiast or a professional looking to optimize engine performance, investing in a high-quality throttle body can deliver significant results.

As always, ensure that any modifications are complemented by proper tuning and maintenance to achieve the best performance from your vehicle.