Table of Contents
The Renesis engine, known for its unique rotary design, offers a thrilling driving experience. One of the best ways to enhance its performance is by upgrading the exhaust system. This guide will walk you through the installation of the Borla Exhaust system, which can provide a boost of 15 horsepower for an investment of around $1,200.
Why Upgrade to Borla Exhaust?
Upgrading to a Borla Exhaust system can significantly improve your vehicle’s performance and sound. Here are some reasons to consider this upgrade:
- Increased Horsepower: Experience up to 15 additional horsepower.
- Improved Sound: Enjoy a deeper, more aggressive exhaust note.
- Enhanced Performance: Better exhaust flow leads to improved engine efficiency.
- Quality Construction: Made from high-quality materials for durability.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Socket set
- Wrench set
- Jack and jack stands
- Exhaust hanger removal tool
- New Borla Exhaust system
- High-temperature silicone sealant
- Safety goggles and gloves
Step-by-Step Installation Process
1. Prepare Your Vehicle
Begin by parking your vehicle on a flat surface. Ensure the engine is cool before starting the installation. Use the jack to lift the rear of the car and secure it with jack stands for safety.
2. Remove the Stock Exhaust System
Using your socket set, remove the bolts securing the stock exhaust system to the manifold. Carefully detach the exhaust hangers using the exhaust hanger removal tool. Make sure to support the exhaust as you remove the final hangers to prevent it from falling.
3. Prepare the Borla Exhaust
Unbox the Borla Exhaust system and lay out all components. Refer to the installation manual for specific parts and their arrangement. Apply high-temperature silicone sealant to the joints where the exhaust connects to ensure a tight seal.
4. Install the Borla Exhaust System
Begin by attaching the new exhaust system to the manifold. Align the exhaust pipes and secure them with bolts. Ensure that the system is properly aligned and that there are no obstructions. Attach the exhaust hangers to their respective locations, ensuring a snug fit.
5. Double Check Connections
Once the Borla Exhaust is installed, double-check all connections and bolts to ensure everything is tight. Make sure that the exhaust is not touching any other components of the vehicle.
6. Lower the Vehicle
Carefully lower the vehicle back to the ground. Remove the jack stands and ensure the vehicle is stable before starting the engine.
7. Test the New Exhaust
Start the engine and listen for any unusual sounds. Check for leaks around the joints. If everything sounds good, take your vehicle for a test drive to experience the new performance and sound of your Borla Exhaust system.
Maintenance Tips
To keep your Borla Exhaust system in top condition, consider the following maintenance tips:
- Regularly check for leaks and loose connections.
- Clean the exhaust tips to maintain appearance.
- Inspect hangers for wear and replace if necessary.
- Consider professional inspection during routine vehicle maintenance.
Conclusion
Upgrading to a Borla Exhaust system on your Renesis engine is a worthwhile investment that can enhance both performance and sound. By following this installation guide, you can achieve a boost of 15 horsepower and enjoy a more engaging driving experience. Happy driving!