Roll Racing Tips Installation: Step-by-step Guide for Shr Performance Turbo Kit

by

Installing the SHR Performance Turbo Kit can be an exciting project for automotive enthusiasts looking to enhance their vehicle’s performance. This guide provides a step-by-step approach to ensure a successful installation.

Tools and Materials Needed

  • SHR Performance Turbo Kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Oil catch can
  • Intercooler piping
  • Silicone couplers
  • Hoses and clamps
  • Vacuum lines

Preparation Steps

Before starting the installation, it’s crucial to prepare your workspace and vehicle. Follow these preparation steps:

  • Ensure your vehicle is parked on a flat surface.
  • Disconnect the battery to prevent any electrical issues.
  • Gather all necessary tools and materials.
  • Read through the SHR Performance Turbo Kit manual for specific instructions.

Step 1: Remove the Stock Components

Begin by removing the stock components that will be replaced by the turbo kit. This includes:

  • Intake manifold
  • Exhaust manifold
  • Stock turbocharger (if applicable)
  • Intercooler

Make sure to keep track of all bolts and connectors for reinstallation.

Step 2: Install the Turbocharger

Now, it’s time to install the new turbocharger. Follow these steps:

  • Position the turbocharger in place and secure it with the provided bolts.
  • Connect the oil feed and return lines, ensuring they are tight and leak-free.
  • Attach the intake and exhaust flanges, using new gaskets if required.

Step 3: Install the Intercooler and Piping

Next, install the intercooler and associated piping. Follow these steps:

  • Mount the intercooler in the designated location, ensuring it is secure.
  • Connect the silicone couplers to the intercooler and turbocharger.
  • Route the piping carefully, avoiding any moving parts or hot surfaces.

Step 4: Connect the Vacuum Lines and Hoses

After the intercooler is installed, connect all necessary vacuum lines and hoses:

  • Attach the vacuum lines to the wastegate and boost controller.
  • Ensure all hoses are secured with clamps to prevent leaks.

Step 5: Reinstall the Intake Manifold

With the turbo and intercooler in place, reinstall the intake manifold:

  • Align the manifold with the engine and secure it with bolts.
  • Reconnect any sensors or electrical connectors that were removed.

Step 6: Final Checks and Battery Reconnection

Before starting the engine, perform the following checks:

  • Inspect all connections for tightness and leaks.
  • Ensure there are no loose tools or parts in the engine bay.
  • Reconnect the battery.

Step 7: Start the Engine

Finally, start the engine and monitor for any unusual sounds or leaks:

  • Let the engine idle for a few minutes.
  • Check the oil pressure and temperature readings.
  • Test drive the vehicle to ensure everything is functioning correctly.

Troubleshooting Common Issues

If you encounter issues after installation, consider the following troubleshooting tips:

  • Check for vacuum leaks if experiencing poor performance.
  • Inspect all electrical connections for secure fittings.
  • Review the installation manual for any missed steps.

Conclusion

Installing the SHR Performance Turbo Kit can greatly enhance your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased horsepower and torque.