Table of Contents
The Audi RS5 2.9TT is a powerhouse of a vehicle, known for its impressive performance and sleek design. To take your RS5 to the next level, many enthusiasts turn to modifications that enhance performance and efficiency. In this guide, we will focus on the installation of the AWE Tuning intercooler and a software upgrade, which are popular modifications among RS5 owners.
Why Upgrade to AWE Tuning Intercooler?
The AWE Tuning intercooler is designed to improve the efficiency of your RS5’s engine by lowering intake temperatures. This results in better performance and reliability, especially during high-stress driving conditions. Here are some key benefits:
- Improved Cooling: The larger core size allows for better heat dissipation.
- Enhanced Performance: Lower intake temperatures lead to more power and responsiveness.
- Durability: Built with high-quality materials to withstand extreme conditions.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Socket set
- Torque wrench
- Screwdrivers (flathead and Phillips)
- Intercooler kit from AWE Tuning
- Silicone hoses and clamps
- Optional: Lift or jack stands for better access
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Start by ensuring your vehicle is parked on a level surface. Turn off the engine and allow it to cool down. Disconnect the negative battery terminal to prevent any electrical issues during installation.
Step 2: Remove the Front Bumper
To access the intercooler, the front bumper must be removed. Follow these steps:
- Remove the screws and clips securing the bumper.
- Carefully pull the bumper away from the vehicle, ensuring no clips are damaged.
- Disconnect any electrical connectors for fog lights or sensors.
Step 3: Remove the Stock Intercooler
With the bumper removed, locate the stock intercooler. Follow these steps:
- Unclip and remove the factory hoses attached to the intercooler.
- Unscrew the mounting bolts holding the intercooler in place.
- Carefully remove the intercooler from the vehicle.
Step 4: Install the AWE Tuning Intercooler
Now, it’s time to install the new AWE Tuning intercooler:
- Position the AWE intercooler in place and secure it with the provided mounting bolts.
- Attach the silicone hoses and ensure they are tightly secured with clamps.
- Double-check all connections for any leaks or loose fittings.
Step 5: Reinstall the Front Bumper
Once the intercooler is installed, it’s time to put the front bumper back on:
- Reconnect any electrical connectors for fog lights or sensors.
- Align the bumper and secure it with screws and clips.
- Ensure everything is tightly fastened and properly aligned.
Step 6: Reconnect the Battery
Reconnect the negative battery terminal and ensure all electrical systems are functioning properly.
Software Upgrade for Enhanced Performance
After installing the AWE intercooler, a software upgrade is essential to maximize the performance benefits. This upgrade adjusts the engine’s tuning parameters to work with the new intercooler. Here’s how to perform the software upgrade:
- Visit an authorized AWE Tuning dealer or use a compatible tuning software.
- Follow the instructions provided by the software to upload the new tune.
- Ensure the vehicle is on a stable surface and has enough battery charge during the process.
Testing and Verification
After installation and software upgrade, it’s crucial to test your RS5 to ensure everything is functioning correctly:
- Start the engine and check for any warning lights on the dashboard.
- Monitor the engine temperature and performance during a test drive.
- Listen for any unusual noises that may indicate installation issues.
Conclusion
Upgrading your Audi RS5 2.9TT with the AWE Tuning intercooler and software is a significant step towards enhancing its performance. With improved cooling efficiency and optimized engine tuning, you’ll enjoy a more powerful and responsive driving experience. Always ensure to follow the installation steps carefully and consult a professional if needed.