Table of Contents
The Steeda Challenger Exhaust System is designed to enhance your vehicle’s performance while delivering an aggressive exhaust note. This step-by-step guide will walk you through the installation process, ensuring you achieve that bold sound you desire.
Tools and Materials Needed
- Steeda Challenger Exhaust System
- Socket set
- Wrench set
- Jack and jack stands
- Safety glasses
- Gloves
- Lubricant spray
- Torque wrench
Preparation Steps
Before starting the installation, make sure to prepare your workspace and vehicle. Follow these preparation steps:
- Ensure the vehicle is parked on a flat surface.
- Engage the parking brake.
- Disconnect the battery to avoid any electrical issues.
- Lift the vehicle using a jack and secure it with jack stands.
Removing the Stock Exhaust System
To install the Steeda exhaust system, the stock exhaust must be removed first. Follow these steps:
- Locate the exhaust clamps and remove them using a socket or wrench.
- Disconnect any hangers holding the exhaust in place.
- Carefully slide the stock exhaust off the exhaust pipes.
- Remove the old exhaust system completely from the vehicle.
Installing the Steeda Exhaust System
With the stock exhaust removed, it’s time to install the Steeda Challenger Exhaust System. Follow these steps for a successful installation:
- Begin by positioning the new exhaust system under the vehicle.
- Align the exhaust pipes with the existing exhaust flanges.
- Slide the new exhaust system into place, ensuring it fits snugly.
- Secure the exhaust system using the provided clamps.
- Reconnect any hangers and ensure everything is tight.
Final Adjustments and Checks
After the exhaust system is installed, it’s important to make final adjustments and checks:
- Check all clamps and connections to ensure they are tight.
- Adjust the exhaust tips to achieve the desired look.
- Reinstall the battery connection.
- Lower the vehicle from the jack stands.
Testing the New Exhaust System
Once everything is secured and adjusted, it’s time to test the new exhaust system:
- Start the engine and listen for any unusual noises.
- Check for any exhaust leaks around the connections.
- Take the vehicle for a short test drive to evaluate performance.
Conclusion
Installing the Steeda Challenger Exhaust System can significantly enhance your vehicle’s performance and sound. By following this step-by-step guide, you can achieve that bold exhaust note you’ve been looking for. Enjoy your new exhaust system and the thrilling driving experience it brings!