Table of Contents
The 6.2 Hellcat is renowned for its monstrous power and performance. One of the best ways to enhance its sound and performance is by installing a Mopar cat-back exhaust system. This guide will walk you through the step-by-step process of installation to help you achieve maximum sound and performance.
Tools and Materials Needed
- Mopar Cat-back Exhaust System
- Socket Set
- Wrench Set
- Jack and Jack Stands
- Safety Glasses
- Gloves
- Torque Wrench
- Rubber Mallet
Before starting the installation, ensure you have all the necessary tools and materials on hand. This will make the process smoother and more efficient.
Preparation Steps
- Park the vehicle on a flat surface.
- Engage the parking brake.
- Disconnect the negative battery terminal.
- Raise the vehicle using a jack and secure it with jack stands.
Proper preparation is key to a successful installation. Make sure to follow these steps carefully to ensure safety and efficiency during the process.
Removing the Stock Exhaust
To install the Mopar cat-back exhaust, you first need to remove the stock exhaust system. Follow these steps:
- Locate the exhaust hangers and use a lubricant to ease removal.
- Remove the bolts connecting the stock exhaust to the catalytic converter.
- Carefully slide the stock exhaust off the hangers and remove it from the vehicle.
Be cautious during this step to avoid damaging any components. A rubber mallet may help in loosening stubborn connections.
Installing the Mopar Cat-back Exhaust
With the stock exhaust removed, you can now install the Mopar cat-back exhaust. Follow these steps:
- Begin by positioning the new exhaust system under the vehicle.
- Attach the exhaust pipes to the catalytic converter using the provided bolts.
- Secure the exhaust hangers into place, ensuring they are properly aligned.
- Use a torque wrench to tighten all bolts to the manufacturer’s specifications.
Ensure that all connections are secure to prevent any exhaust leaks. Double-check your work before moving on to the next step.
Final Adjustments
Once the exhaust is installed, you need to make some final adjustments:
- Check the alignment of the exhaust tips to ensure they are centered.
- Make any necessary adjustments to the hangers.
- Recheck all bolts and connections for tightness.
Proper alignment not only enhances the appearance of your vehicle but also ensures optimal performance.
Reconnecting the Battery and Testing
After making all adjustments, it’s time to reconnect the battery and test the new exhaust system:
- Reconnect the negative battery terminal.
- Start the engine and listen for any unusual sounds.
- Check for any exhaust leaks around the connections.
Listening for unusual sounds will help you identify any issues that may need to be addressed immediately.
Conclusion
Installing a Mopar cat-back exhaust on your 6.2 Hellcat is a straightforward process that can significantly enhance the sound and performance of your vehicle. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of a more aggressive exhaust note.