Table of Contents
The A90 Supra is a marvel of engineering, blending performance and style. One of the most exciting upgrades you can make to this vehicle is installing a Turbosport Hybrid Turbo Kit, which can push the power output to an impressive 470 horsepower. This guide will walk you through each step of the installation process.
Tools and Materials Needed
- Socket set (metric)
- Torque wrench
- Flathead and Phillips screwdrivers
- Wrench set
- Intercooler piping kit
- Oil feed and return lines
- Cooling system tools
- Turbosport Hybrid Turbo Kit
- Engine oil
- Coolant
Preparation
Before starting the installation, ensure your A90 Supra is parked on a flat surface and the engine is cool. Gather all tools and materials to streamline the process.
Step 1: Disconnect the Battery
Begin by disconnecting the negative terminal of the battery. This will prevent any electrical shorts during the installation process.
Step 2: Remove the Engine Cover
Using a socket wrench, remove the bolts securing the engine cover. Carefully lift it off and set it aside to expose the engine components.
Step 3: Drain the Coolant
Locate the drain plug on the radiator and drain the coolant into a suitable container. This will prevent spills during turbo installation.
Step 4: Remove the Stock Turbo
Disconnect the oil feed and return lines from the stock turbo. Remove the intake and exhaust connections, followed by the mounting bolts. Carefully lift the stock turbo out of the engine bay.
Step 5: Install the Turbosport Hybrid Turbo
Position the Turbosport Hybrid Turbo in place, aligning it with the mounting points. Secure it with the provided bolts, ensuring a tight fit.
Step 6: Connect Oil Lines
Attach the new oil feed and return lines to the hybrid turbo. Ensure that all connections are secure and free from leaks.
Step 7: Reinstall the Intercooler Piping
Reconnect the intercooler piping, ensuring that all clamps are tight and secure. This step is crucial for maintaining boost pressure.
Step 8: Refill the Cooling System
Fill the cooling system with new coolant. Check for any leaks around the connections before proceeding.
Final Steps
Step 9: Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure that it is tightened properly to avoid any electrical issues.
Step 10: Start the Engine
Start the engine and let it idle for a few minutes. Check for any unusual noises or leaks. If everything sounds normal, you’re ready to test drive.
Step 11: Test Drive
Take your A90 Supra for a test drive, gradually increasing speed to ensure the turbo is functioning correctly. Monitor the boost gauge and engine performance.
Conclusion
Installing a Turbosport Hybrid Turbo Kit in your A90 Supra can significantly enhance its performance. By following these steps carefully, you can ensure a successful installation and enjoy the exhilarating power boost.