Table of Contents
The B58 engine, known for its robust performance and tuning potential, has become a favorite among automotive enthusiasts. This article will guide you through a step-by-step intake build for achieving over 600 horsepower using AFE, VRSF, and Wagner parts. With the right components and careful installation, you can unlock the full potential of your B58 engine.
Understanding the B58 Engine
The B58 is a 3.0-liter inline-six engine developed by BMW. It features a twin-scroll turbocharger, direct fuel injection, and a robust cooling system, making it an excellent candidate for high-performance modifications.
Parts Required for the Build
- AFE Power intake system
- VRSF charge pipe
- Wagner intercooler
- Required tools (sockets, wrenches, etc.)
- Optional tuning software
Step 1: Remove the Stock Intake System
Begin by disconnecting the battery to ensure safety. Remove the engine cover and carefully disconnect any electrical connectors attached to the stock intake system. Unbolt the intake manifold from the engine and remove it along with the airbox.
Step 2: Install the AFE Power Intake System
With the stock intake removed, it’s time to install the AFE Power intake system. Follow these steps:
- Position the AFE air filter into the designated location.
- Secure the intake tube to the throttle body using the provided clamps.
- Ensure all connections are tight and properly sealed.
Step 3: Upgrade the Charge Pipe with VRSF
The VRSF charge pipe will improve airflow and enhance throttle response. To install it:
- Remove the stock charge pipe by loosening the clamps.
- Connect the VRSF charge pipe to the turbocharger and throttle body.
- Tighten the clamps securely to prevent any boost leaks.
Step 4: Install the Wagner Intercooler
The Wagner intercooler will provide better cooling efficiency. Follow these instructions for installation:
- Remove the stock intercooler by disconnecting the piping.
- Position the Wagner intercooler in its place.
- Connect the piping from the charge pipe to the intercooler and from the intercooler to the intake manifold.
- Ensure all connections are secure and leak-free.
Step 5: Reconnect Electrical Components
Once all the components are installed, reconnect any electrical connectors that were detached during the removal of the stock intake system. Double-check that everything is properly connected and secured.
Step 6: Reinstall the Engine Cover and Battery
After ensuring all components are correctly installed, reinstall the engine cover. Finally, reconnect the battery and ensure that all tools are removed from the engine bay.
Step 7: Tuning for Optimal Performance
To achieve 600+ horsepower, it is essential to tune your engine after completing the intake build. Consider using a reputable tuning software that supports the B58 engine. This step ensures that the engine runs efficiently with the new intake system.
Conclusion
With the AFE Power intake system, VRSF charge pipe, and Wagner intercooler installed, your B58 engine is now equipped to handle over 600 horsepower. Regular maintenance and tuning will help you maintain peak performance. Enjoy the enhanced driving experience!