Step-by-step Civic Type R Turbo Install with Precision Turbo T4 600hp Kit

by

Step-by-Step Civic Type R Turbo Install with Precision Turbo T4 600hp Kit

The Civic Type R is a remarkable vehicle known for its performance and handling. Upgrading to a Precision Turbo T4 600hp kit can significantly enhance its capabilities. This guide will walk you through the installation process step-by-step, ensuring a successful upgrade.

Tools and Materials Needed

  • Precision Turbo T4 600hp Kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Intercooler piping
  • Boost controller
  • Oil catch can
  • Vacuum lines
  • Gaskets and seals
  • Safety glasses
  • Gloves

Preparation for Installation

Before beginning the installation, ensure the vehicle is parked on a flat surface. Disconnect the battery to prevent any electrical issues during the process. Wear safety glasses and gloves for protection.

Removing the Stock Turbo

The first step is to remove the stock turbocharger. Follow these steps:

  • Remove the intake system, including the air filter and ducting.
  • Disconnect the exhaust downpipe from the stock turbo.
  • Unplug any electrical connectors attached to the turbo.
  • Remove the oil feed and drain lines.
  • Unscrew the bolts securing the turbo to the manifold.
  • Carefully lift out the stock turbo.

Installing the Precision Turbo T4

With the stock turbo removed, you can now install the Precision Turbo T4:

  • Place the new turbo in position on the manifold.
  • Secure it using the bolts removed earlier, ensuring they are torqued to the manufacturer’s specifications.
  • Reconnect the oil feed and drain lines, ensuring there are no leaks.
  • Plug in all electrical connectors.
  • Reattach the exhaust downpipe to the turbo.

Intercooler Installation

The next step involves installing the intercooler. Follow these instructions:

  • Remove the front bumper to access the intercooler mounting area.
  • Mount the intercooler in the designated location using the provided brackets.
  • Connect the intercooler piping from the turbo to the intercooler.
  • Ensure all connections are secure and leak-free.

Boost Controller Setup

Setting up the boost controller is crucial for managing the turbo’s power output:

  • Follow the manufacturer instructions for wiring the boost controller.
  • Connect the boost controller to the vacuum lines as directed.
  • Secure the boost controller in a location that is easily accessible.

Final Checks and Reassembly

Before reassembling the vehicle, perform the following checks:

  • Inspect all connections for tightness and leaks.
  • Check that all electrical connections are secure.
  • Ensure the intercooler piping is properly secured.

Reinstalling the Bumper and Battery

Once all checks are complete, it’s time to reassemble the vehicle:

  • Reattach the front bumper carefully.
  • Reconnect the battery.

Testing the Installation

After installation, it’s essential to test the vehicle:

  • Start the engine and listen for any unusual noises.
  • Check for leaks around the turbo and intercooler.
  • Take the vehicle for a test drive to ensure everything is functioning correctly.

Conclusion

Installing a Precision Turbo T4 600hp kit on your Civic Type R can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.