Table of Contents
The F87 M2 is a popular choice among performance car enthusiasts, and upgrading the exhaust system can significantly enhance its sound and performance. In this article, we will provide a detailed step-by-step guide on how to install a performance exhaust system on the F87 M2, comparing two leading brands: Remus and Akrapovic.
Tools and Materials Needed
- Socket set
- Torque wrench
- Jack and jack stands
- Exhaust hanger removal tool
- Safety goggles
- Performance exhaust system (Remus or Akrapovic)
Before starting the installation, ensure you have all the necessary tools and materials at hand. This will make the process smoother and more efficient.
Preparation
Begin by preparing your workspace. Make sure the area is well-ventilated and free of any obstructions. Wear safety goggles to protect your eyes during the installation process.
Next, raise the car using a jack and secure it with jack stands. This will give you enough space to work comfortably under the vehicle.
Removing the Stock Exhaust
To remove the stock exhaust system, follow these steps:
- Locate the exhaust hangers and use the exhaust hanger removal tool to detach them.
- Unbolt the exhaust from the exhaust manifold using the socket set.
- Carefully slide the exhaust system out from under the vehicle.
Be cautious while removing the exhaust, as it can be heavy. It may be helpful to have a friend assist you during this process.
Installing the Remus Exhaust
If you choose the Remus exhaust system, follow these installation steps:
- Position the Remus exhaust under the vehicle.
- Align the exhaust with the exhaust manifold and slide it into place.
- Secure the exhaust using the bolts you removed earlier.
- Reattach the exhaust hangers, ensuring they are firmly in place.
Once installed, double-check all connections to ensure everything is secure.
Installing the Akrapovic Exhaust
For those opting for the Akrapovic exhaust system, the steps are similar:
- Carefully place the Akrapovic exhaust under the vehicle.
- Align it with the exhaust manifold and position it correctly.
- Use the original bolts to secure the exhaust in place.
- Attach the exhaust hangers, ensuring a snug fit.
Again, verify that all connections are tight and secure before proceeding.
Final Checks
After installing either the Remus or Akrapovic exhaust, perform the following final checks:
- Inspect all bolts and hangers to ensure they are tightened properly.
- Check for any exhaust leaks by starting the car and listening for unusual sounds.
- Take the car for a short drive to confirm the exhaust is functioning correctly.
Pay attention to the sound and performance of the vehicle. Both the Remus and Akrapovic systems should provide a noticeable improvement over the stock exhaust.
Conclusion
Upgrading the exhaust system on the F87 M2 is a rewarding project that can enhance both performance and sound. Whether you choose Remus or Akrapovic, the installation process is straightforward with the right tools and preparation. Enjoy your enhanced driving experience!