Step-by-step G70 Turbo Installation with Apr and Catalyst Performance Kits: a Complete Guide

by

The G70 Turbo installation is an exciting project for any automotive enthusiast looking to enhance their vehicle’s performance. This guide will walk you through the step-by-step process of installing the turbo using APR and Catalyst Performance kits.

Tools and Materials Needed

Before starting the installation, gather the following tools and materials:

  • Socket set
  • Torque wrench
  • Screwdrivers (flathead and Phillips)
  • Wrenches
  • Engine oil
  • APR Turbo Kit
  • Catalyst Performance Kit
  • Coolant
  • Shop towels

Preparation Steps

Preparation is key to a successful installation. Follow these steps to ensure you are ready:

  • Ensure the vehicle is on a flat surface.
  • Disconnect the battery to prevent any electrical issues.
  • Remove any engine covers or components that obstruct access to the turbo area.
  • Drain the coolant and engine oil if necessary.

Removing the Stock Turbo

Now that you’re prepared, it’s time to remove the stock turbo. Follow these steps:

  • Disconnect the intake and exhaust pipes connected to the stock turbo.
  • Unplug any electrical connections attached to the turbo.
  • Remove the bolts securing the turbo to the manifold.
  • Carefully lift the turbo out of the engine bay.

Installing the APR Turbo Kit

With the stock turbo removed, you can now install the APR Turbo Kit. Follow these steps:

  • Position the new APR turbo in place.
  • Secure the turbo to the manifold with the provided bolts, tightening them to the manufacturer’s specifications.
  • Reconnect the electrical connections to the turbo.
  • Attach the intake and exhaust pipes to the new turbo.

Installing the Catalyst Performance Kit

The Catalyst Performance Kit enhances the performance of your turbo. Here’s how to install it:

  • Remove the old downpipe and catalytic converter if applicable.
  • Install the new downpipe from the Catalyst Performance Kit.
  • Ensure all connections are secure and leak-free.
  • Reinstall any components that were removed for access.

Finalizing the Installation

After installing both the APR Turbo Kit and the Catalyst Performance Kit, it’s time to finalize the installation:

  • Refill the engine oil and coolant as needed.
  • Reconnect the battery.
  • Start the engine and check for any leaks or abnormal sounds.
  • Allow the engine to reach operating temperature and monitor performance.

Testing and Tuning

Once the installation is complete, testing and tuning are essential for optimal performance:

  • Take the vehicle for a test drive to assess performance.
  • Check for any warning lights on the dashboard.
  • Consider a professional tune for the best performance gains.

Conclusion

The installation of the G70 Turbo with APR and Catalyst Performance Kits can significantly enhance your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.