Table of Contents
Installing a Nismo exhaust system can significantly enhance your vehicle’s performance by providing a boost of up to 15 horsepower. This step-by-step guide will walk you through the process, ensuring that you can achieve this upgrade with ease and confidence.
What You Will Need
- Nismo exhaust system kit
- Socket wrench set
- Jack and jack stands
- Safety goggles
- Gloves
- Cutting tool (if necessary)
- Lubricant spray
Before starting, ensure you have all the necessary tools and safety equipment. This preparation will help streamline the installation process.
Step 1: Prepare Your Vehicle
Begin by parking your vehicle on a flat surface and engaging the parking brake. Use the jack to lift the rear of the car and secure it with jack stands for safety.
Safety First
Always wear safety goggles and gloves to protect yourself from debris and sharp edges during the installation process.
Step 2: Remove the Stock Exhaust System
Locate the stock exhaust system and identify the mounting points. Use your socket wrench to remove the bolts securing the exhaust system to the vehicle.
If your vehicle has a welded exhaust, carefully cut the exhaust using the cutting tool. Make sure to do this in a well-ventilated area and follow all safety precautions.
Disconnecting the Old System
Once the bolts are removed, gently disconnect the exhaust from the hangers. It may require some force, so use lubricant spray to ease the process if necessary.
Step 3: Prepare the Nismo Exhaust System
Unbox your Nismo exhaust system and lay out all the components. Familiarize yourself with the parts and ensure everything is included as per the installation manual.
Step 4: Install the Nismo Exhaust System
Begin by positioning the Nismo exhaust system under the vehicle. Align the exhaust pipes with the mounting points on the vehicle.
Secure the exhaust system by attaching it to the hangers and tightening the bolts. Ensure a snug fit without over-tightening, which could damage the components.
Check for Leaks
After installation, check for any gaps or leaks in the exhaust system. This can be done by starting the engine and listening for any unusual sounds or observing any exhaust fumes escaping.
Step 5: Lower the Vehicle
Once you have confirmed that the exhaust system is securely in place and there are no leaks, carefully lower the vehicle back to the ground using the jack.
Step 6: Test Drive
Take your vehicle for a test drive to experience the new performance boost. Pay attention to any changes in sound and acceleration, which should reflect the 15 horsepower increase.
Final Thoughts
Installing a Nismo exhaust system can be a rewarding project that enhances your vehicle’s performance. With careful attention to detail and adherence to safety guidelines, you can successfully complete this upgrade and enjoy the benefits of improved power and sound.