Step-by-step Guide: Installing a Nismo Suspension Kit on Your Infiniti G35

by

Installing a Nismo suspension kit on your Infiniti G35 can significantly enhance your vehicle’s performance and handling. This step-by-step guide will walk you through the installation process, ensuring you achieve the best results while maintaining safety and quality.

Tools and Materials Needed

  • Nismo suspension kit
  • Jack and jack stands
  • Socket set
  • Wrench set
  • Torque wrench
  • Spring compressor
  • Safety goggles
  • Gloves

Preparation Steps

Before you begin the installation, it’s essential to prepare your workspace and vehicle. Follow these steps:

  • Park your Infiniti G35 on a flat surface.
  • Engage the parking brake to prevent any movement.
  • Gather all necessary tools and materials.
  • Wear safety goggles and gloves for protection.

Step 1: Lifting the Vehicle

To access the suspension components, lift the vehicle using a jack and secure it with jack stands:

  • Locate the jacking points on your G35.
  • Use the jack to lift the vehicle off the ground.
  • Place jack stands under the vehicle for added support.

Step 2: Removing the Old Suspension

With the vehicle securely lifted, it’s time to remove the old suspension components:

  • Remove the wheels using a socket set.
  • Detach the brake calipers and hang them securely.
  • Remove the old struts and springs using the appropriate tools.
  • Ensure all old components are completely removed.

Step 3: Installing the Nismo Suspension Kit

Now, you can begin installing the new Nismo suspension kit:

  • Use a spring compressor to compress the new springs.
  • Install the new struts and springs according to the manufacturer’s instructions.
  • Reconnect the brake calipers and ensure they are secure.
  • Repeat the process for all corners of the vehicle.

Step 4: Reassembling the Vehicle

Once all suspension components are installed, it’s time to reassemble your vehicle:

  • Reattach the wheels and tighten the lug nuts.
  • Double-check all connections and fittings for security.
  • Lower the vehicle back to the ground using the jack.

Step 5: Final Checks and Test Drive

After the installation, perform final checks before taking your G35 for a test drive:

  • Check the alignment of the wheels.
  • Inspect the suspension components for any loose fittings.
  • Take a short test drive to assess handling and comfort.

Conclusion

Installing a Nismo suspension kit on your Infiniti G35 is a rewarding project that can improve your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of enhanced handling and ride quality.