Table of Contents
The Honda Civic Type R is known for its impressive performance and handling. To enhance its capabilities further, many enthusiasts turn to the COBB Accessport. This guide will walk you through the step-by-step process of installing the Accessport on your Honda Civic Type R, ensuring you get the most out of your vehicle.
What You Need
Before starting the installation, gather the necessary tools and materials:
- COBB Accessport device
- OBD-II connector
- Computer with internet access
- USB cable
- Basic hand tools (if needed for modifications)
Step 1: Prepare Your Vehicle
Ensure your Honda Civic Type R is parked on a flat surface and is turned off. This will prevent any accidental ignition during the installation process.
Step 2: Download the COBB Software
Visit the COBB Tuning website and download the Accessport Manager software. This software is essential for managing your Accessport and uploading maps to your vehicle.
Step 3: Connect the Accessport to Your Computer
Using the USB cable, connect the COBB Accessport to your computer. Open the Accessport Manager software and follow the prompts to update the Accessport firmware if necessary.
Step 4: Connect the Accessport to Your Vehicle
Locate the OBD-II port in your Honda Civic Type R, which is typically found under the dashboard near the driver’s seat. Plug the Accessport into this port.
Step 5: Power On the Accessport
Turn your vehicle’s ignition to the “On” position without starting the engine. This will power on the Accessport, allowing it to communicate with your vehicle’s ECU.
Step 6: Select a Tune
Using the Accessport’s interface, navigate to the tuning options. Choose a suitable map for your vehicle based on your modifications and performance goals. COBB offers various pre-configured maps to suit different setups.
Step 7: Upload the Tune
Once you have selected a map, follow the prompts to upload it to your vehicle’s ECU. This process may take several minutes, and it is crucial not to turn off the ignition during this time.
Step 8: Finalize the Installation
After the upload is complete, the Accessport will prompt you to restart your vehicle. Turn off the ignition, wait a few seconds, and then start your engine. Verify that the Accessport is functioning correctly by checking the gauges and parameters.
Step 9: Monitor Performance
With the Accessport installed and tuned, take your Honda Civic Type R for a test drive. Monitor the performance metrics displayed on the Accessport to ensure everything is running smoothly. Adjust the settings as needed for optimal performance.
Step 10: Maintain Your Accessport
Regularly check for software updates on the COBB website. Keeping your Accessport updated ensures you have the latest features and maps for your vehicle. Additionally, consider re-evaluating your tune if you make further modifications to your Civic Type R.
Conclusion
Installing the COBB Accessport on your Honda Civic Type R can significantly enhance your vehicle’s performance. By following these steps, you can ensure a smooth installation process and get the most out of your tuning experience. Enjoy the ride!