Table of Contents
The Cobb Tuning Accessport is a powerful tool for enhancing the performance of your Genesis G70 3.3T. This step-by-step guide will walk you through the installation process, ensuring you can take full advantage of your vehicle’s capabilities.
What You Will Need
- Cobb Tuning Accessport
- OBD-II connector
- Computer or laptop with internet access
- USB cable (included with Accessport)
- Vehicle owner’s manual
Step 1: Prepare Your Vehicle
Before you begin, ensure your vehicle is parked on a flat surface and the engine is off. This will provide a safe environment for the installation process.
Step 2: Connect the Accessport
Locate the OBD-II port in your G70, which is typically found under the dashboard near the driver’s seat. Plug the Accessport’s OBD-II connector into this port.
Step 3: Power On the Accessport
Turn the ignition key to the ‘On’ position without starting the engine. This will power up the Accessport and allow it to communicate with your vehicle’s ECU.
Step 4: Download the Accessport Manager
On your computer, navigate to the Cobb Tuning website and download the Accessport Manager software. This software is essential for managing your Accessport and uploading tunes.
Step 5: Connect the Accessport to Your Computer
Using the USB cable, connect the Accessport to your computer. The Accessport Manager should recognize the device automatically.
Step 6: Update the Accessport Firmware
Within the Accessport Manager, check for any firmware updates. If available, follow the prompts to update your Accessport to the latest version. This ensures optimal performance and compatibility.
Step 7: Select Your Vehicle
In the Accessport Manager, navigate to the ‘Tune’ section and select your specific vehicle model, which is the Genesis G70 3.3T. This step is crucial for applying the correct tuning parameters.
Step 8: Choose a Tune
Browse through the available tunes and select one that matches your performance goals. Options may include stock, stage 1, or other performance tunes provided by Cobb Tuning.
Step 9: Upload the Tune
Once you’ve selected a tune, follow the prompts in the Accessport Manager to upload it to your vehicle’s ECU. This process may take several minutes, so be patient and do not disconnect the Accessport.
Step 10: Verify the Installation
After the upload is complete, disconnect the Accessport from your computer and return to your vehicle. Turn the ignition back on and check the Accessport display to ensure the new tune is active.
Step 11: Test Drive Your Vehicle
Take your G70 for a test drive to experience the performance improvements. Monitor the Accessport for any error messages or alerts during your drive.
Conclusion
Installing a Cobb Tuning Accessport on your Genesis G70 3.3T is a straightforward process that can significantly enhance your driving experience. By following this guide, you can ensure a successful installation and enjoy the benefits of improved performance.