Table of Contents
The Porsche Boxster is a beloved sports car known for its agile handling and performance. One way to enhance its power and driving experience is by installing a Fabspeed supercharger. This guide will walk you through the step-by-step process of installing a Fabspeed supercharger on your Porsche Boxster.
Tools and Materials Needed
- Fabspeed Supercharger Kit
- Socket Set
- Torque Wrench
- Wrenches
- Flathead and Phillips Screwdrivers
- Wire Cutters
- Heat Gun
- Shop Towels
- Safety Glasses
- Gloves
Preparation Steps
Before starting the installation, ensure you have a clean workspace and all necessary tools and materials. Follow these preparation steps:
- Disconnect the battery to prevent any electrical issues.
- Remove any engine covers or components obstructing access to the engine.
- Read through the Fabspeed installation manual thoroughly.
Removing the Stock Components
The first major step in the installation process is to remove the stock components that will be replaced by the supercharger. Follow these steps:
- Remove the air intake system by unscrewing the clamps and disconnecting any hoses.
- Take out the stock throttle body by unscrewing the bolts and disconnecting the electrical connectors.
- Remove the stock intake manifold if necessary, following the specific instructions in the manual.
Installing the Fabspeed Supercharger
With the stock components removed, you can now install the Fabspeed supercharger. This process involves several key steps:
- Start by placing the supercharger in the designated area and securing it with the provided mounting hardware.
- Connect the throttle body to the supercharger, ensuring all bolts are tightened to the specified torque.
- Attach the new air intake system that comes with the Fabspeed kit, making sure all clamps are secure.
- Install any additional components included in the supercharger kit, such as the intercooler.
Wiring and Electrical Connections
After mechanically installing the supercharger, you will need to handle the wiring and electrical connections:
- Connect the supercharger’s electrical harness to the vehicle’s wiring harness.
- Ensure all connections are secure and insulated to prevent any short circuits.
- Double-check the installation against the manual for any additional wiring requirements.
Final Steps and Testing
Once everything is installed, it’s time to put everything back together and test the system:
- Reinstall any engine covers or components that were removed during the installation.
- Reconnect the battery and ensure all systems are functioning properly.
- Start the engine and listen for any unusual noises.
- Take the car for a test drive to ensure the supercharger is working as expected.
Conclusion
Installing a Fabspeed supercharger on your Porsche Boxster can significantly enhance its performance. By following this step-by-step guide, you can successfully complete the installation process and enjoy the increased power and responsiveness of your vehicle. Always remember to follow safety precautions and consult the Fabspeed manual for specific instructions related to your model.