Table of Contents
The new Integra Type S is an impressive vehicle, but many enthusiasts are looking to enhance its performance further. Installing a Garrett turbocharger can add an additional 70 horsepower, transforming your driving experience. This guide will walk you through the step-by-step process of installing a Garrett turbocharger on your Integra Type S.
Tools and Materials Needed
- Garrett Turbocharger Kit
- Socket Set
- Torque Wrench
- Screwdrivers (Flat and Phillips)
- Wrenches
- Intercooler Piping
- Silicone Hoses
- Oil Feed and Drain Lines
- Vacuum Hose
- Fuel Management System
- Safety Glasses
- Gloves
Preparation Steps
Before starting the installation, ensure that you have all the necessary tools and materials ready. Follow these preparation steps:
- Park the vehicle on a flat surface and engage the parking brake.
- Disconnect the negative terminal of the battery.
- Allow the engine to cool completely.
- Gather all tools and materials in a clean workspace.
Removing the Stock Components
To install the Garrett turbocharger, you will first need to remove the stock components. Follow these steps:
- Remove the engine cover by unscrewing the bolts.
- Disconnect the air intake system, including the air filter and intake piping.
- Remove the stock exhaust manifold by unbolting it from the engine block.
- Disconnect any sensors and wiring harnesses attached to the manifold.
- Take off the stock turbocharger if present, along with any associated lines.
Installing the Garrett Turbocharger
With the stock components removed, you can now proceed to install the Garrett turbocharger. Follow these steps:
- Position the Garrett turbocharger onto the engine block.
- Align the turbocharger with the mounting holes and secure it using the provided bolts.
- Connect the oil feed line to the turbocharger.
- Install the oil drain line, ensuring it is properly secured.
- Attach the intercooler piping to the turbocharger.
- Use silicone hoses to connect the intercooler to the intake manifold.
- Reconnect any sensors and wiring harnesses that were disconnected.
Connecting the Fuel Management System
To support the additional horsepower, you must upgrade the fuel management system. Follow these steps:
- Install a high-flow fuel pump to ensure adequate fuel delivery.
- Replace the stock fuel injectors with larger ones compatible with the turbo setup.
- Connect the new fuel lines to the fuel rail.
- Install a fuel pressure regulator if necessary.
Finalizing the Installation
After connecting the turbocharger and fuel management system, it’s time to finalize the installation. Follow these steps:
- Double-check all connections and ensure everything is tightened to the manufacturer’s specifications.
- Reconnect the negative battery terminal.
- Start the vehicle and let it idle to check for any leaks.
- Monitor the oil pressure and ensure the turbocharger is functioning correctly.
- Take the car for a test drive, gradually increasing speed to evaluate performance.
Maintenance Tips
After installing your Garrett turbocharger, regular maintenance is essential for optimal performance. Consider the following tips:
- Change the oil regularly to keep the turbocharger lubricated.
- Inspect the turbocharger for any signs of wear or damage during routine maintenance.
- Check all connections and hoses for leaks periodically.
- Monitor the fuel system for any irregularities.
Conclusion
Installing a Garrett turbocharger on the new Integra Type S can significantly enhance its performance, providing an additional 70 horsepower. By following this step-by-step guide, you can successfully complete the installation and enjoy the benefits of increased power and driving excitement.