Step-by-step Guide to Installing a Hjc Cl-17 for Track Day Performance Gains

by

Installing a HJC CL-17 helmet can significantly enhance your track day performance. This step-by-step guide will walk you through the process of properly fitting and adjusting your helmet to ensure safety and comfort while riding.

Why Choose the HJC CL-17?

The HJC CL-17 is a popular choice among track riders for its lightweight design, aerodynamic shape, and advanced ventilation system. Here are some reasons to consider this helmet:

  • Safety Standards: Meets or exceeds DOT and Snell safety standards.
  • Comfort: Plush interior padding for a snug fit.
  • Ventilation: Multiple vents for optimal airflow.
  • Style: Available in various graphics and colors.

Gather Your Tools and Materials

Before you begin the installation process, gather the following tools and materials:

  • HJC CL-17 helmet
  • Soft measuring tape
  • Helmet bag or case
  • Microfiber cloth for cleaning
  • Optional: helmet speakers or communication system

Step 1: Measure Your Head Size

Accurate measurement is crucial for a proper helmet fit. Follow these steps:

  • Use the soft measuring tape to measure the circumference of your head.
  • Wrap the tape around your forehead, just above your eyebrows, and around the back of your head.
  • Record the measurement in inches or centimeters.

Step 2: Choose the Right Size

Refer to the HJC sizing chart to find your helmet size based on your head measurement. Keep in mind:

  • Sizes typically range from XS to XXL.
  • Try on different sizes if possible to find the most comfortable fit.
  • Remember that different models may fit differently, so always check the specific model’s sizing guide.

Step 3: Try on the Helmet

Once you have selected the appropriate size, it’s time to try on the helmet:

  • Put the helmet on and fasten the chin strap securely.
  • Check for any pressure points or discomfort.
  • Ensure the helmet sits snugly without excessive movement.

Step 4: Adjust the Interior Padding

The HJC CL-17 comes with removable interior padding. Adjust it for a better fit:

  • Remove the padding and wash it according to the manufacturer’s instructions.
  • Reinsert padding pieces to customize the fit around your cheeks and forehead.
  • Test the fit again after adjustments.

Step 5: Install Communication System (Optional)

If you plan to use a communication system, follow these steps:

  • Choose a compatible communication system designed for the HJC CL-17.
  • Follow the manufacturer’s instructions for installation.
  • Ensure the speakers are positioned correctly for optimal sound quality.

Step 6: Final Fit Check

Before heading to the track, perform a final fit check:

  • Ensure the helmet is snug but comfortable.
  • Check visibility by looking up, down, and side to side.
  • Make sure the chin strap is secure and the helmet does not shift during movement.

Step 7: Care and Maintenance

Proper care will extend the life of your HJC CL-17 helmet:

  • Clean the exterior with a microfiber cloth and mild soap.
  • Regularly check for any signs of wear or damage.
  • Store the helmet in a cool, dry place away from direct sunlight.

Conclusion

Installing and fitting your HJC CL-17 helmet correctly is essential for maximizing performance and safety on track days. By following these steps, you can ensure a perfect fit and enjoy your riding experience to the fullest.