Table of Contents
Installing a lift kit on your F87 M2 can enhance its off-road capabilities, providing better ground clearance and improved suspension performance. This step-by-step guide will walk you through the process of installing a lift kit safely and effectively.
Tools and Materials Needed
- Lift kit specific to F87 M2
- Jack and jack stands
- Socket set
- Torque wrench
- Wrenches
- Spring compressors
- Safety glasses
- Mechanics gloves
Preparation Steps
Before starting the installation, ensure that you have a clean workspace and all necessary tools and materials on hand. Follow these preparation steps:
- Park the vehicle on a flat, level surface.
- Engage the parking brake.
- Disconnect the battery to prevent any electrical issues.
- Remove the wheels for easier access to the suspension components.
Removing the Stock Suspension
With the vehicle prepared, you can begin removing the stock suspension components. Follow these steps carefully:
- Use the jack to lift the vehicle and secure it with jack stands.
- Remove the front struts by loosening the top mount bolts and the bolts at the bottom of the strut.
- Carefully detach the sway bar links from the struts.
- Remove the rear shocks by unbolting them from the top and bottom.
- Take out the rear springs using spring compressors to safely compress them.
Installing the Lift Kit
Now that the stock suspension has been removed, you can install the lift kit. Follow these steps:
- Begin with the front lift kit components. Install the new struts according to the manufacturer’s instructions.
- Reattach the sway bar links to the new struts.
- Install the new lift springs using the spring compressors to ensure they fit securely.
- Move to the rear and install the new shocks and springs, ensuring everything is tightened to the manufacturer’s specifications.
Final Adjustments
After installing the lift kit, it’s essential to make final adjustments to ensure everything is aligned and secure:
- Double-check all bolts and nuts for proper torque settings.
- Reinstall the wheels and lower the vehicle back to the ground.
- Reconnect the battery and check for any warning lights on the dashboard.
- Perform a wheel alignment to ensure proper handling and tire wear.
Testing Your Vehicle
Once everything is installed and adjusted, it’s time to test your vehicle:
- Take your F87 M2 for a short drive to ensure everything is functioning correctly.
- Listen for any unusual noises that may indicate improper installation.
- Test the vehicle on different terrains to evaluate the lift kit’s performance.
Conclusion
Installing a lift kit on your F87 M2 can significantly improve its off-road performance. By following this step-by-step guide, you can ensure a successful installation. Remember to always prioritize safety and consult a professional if you encounter any difficulties during the process.