Step-by-step Guide to Installing a Lunati Voodoo 396 Cam for 70+ Additional Hp

by

Installing a Lunati Voodoo 396 cam can significantly boost your engine’s performance, adding over 70 horsepower. This step-by-step guide will walk you through the installation process, ensuring you get the most out of your camshaft upgrade.

Tools and Materials Needed

  • Lunati Voodoo 396 camshaft
  • Camshaft installation tool
  • Torque wrench
  • Socket set
  • Wrenches
  • Timing chain and gear set
  • Engine oil
  • Gasket set
  • Assembly lube
  • Safety goggles
  • Gloves

Preparation Steps

Before starting the installation, it’s crucial to prepare your workspace and engine. Follow these steps:

  • Ensure you have a clean, well-lit workspace.
  • Gather all necessary tools and materials.
  • Disconnect the battery to prevent any electrical issues.
  • Remove any components obstructing access to the camshaft, such as the intake manifold and valve covers.
  • Drain the engine oil and remove the oil pan for better access.

Removing the Old Camshaft

With the engine prepared, you can now remove the old camshaft. Follow these steps carefully:

  • Remove the timing chain cover to access the timing chain.
  • Disconnect the timing chain from the old camshaft.
  • Remove the old camshaft using the camshaft installation tool.
  • Inspect the old camshaft for wear and damage.

Installing the Lunati Voodoo 396 Cam

Now it’s time to install the new Lunati Voodoo 396 camshaft. Follow these steps for a successful installation:

  • Apply assembly lube to the new camshaft to prevent wear during initial startup.
  • Carefully insert the new camshaft into the engine, ensuring it aligns properly with the timing chain.
  • Reconnect the timing chain to the new camshaft.
  • Install the timing chain cover and ensure it’s sealed properly.

Reassembling the Engine

With the new camshaft in place, you can begin reassembling the engine. Follow these steps:

  • Replace the oil pan and ensure all gaskets are properly seated.
  • Reinstall the valve covers, ensuring a proper seal.
  • Reconnect any components that were removed during disassembly, such as the intake manifold.
  • Fill the engine with fresh oil to lubricate the new camshaft.
  • Reconnect the battery.

Final Checks and Startup

Before starting the engine, perform the following final checks:

  • Double-check all connections and components for proper installation.
  • Ensure there are no leaks from the oil pan or valve covers.
  • Check the oil level and top off if necessary.

Starting the Engine

Once you’ve completed the final checks, it’s time to start the engine:

  • Start the engine and let it idle for a few minutes.
  • Listen for any unusual sounds that may indicate a problem.
  • Check the oil pressure to ensure proper lubrication.
  • After a few minutes, turn off the engine and check for any leaks.

Conclusion

Installing a Lunati Voodoo 396 camshaft can provide a significant performance boost. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased horsepower.