Step-by-step Guide to Installing a Megan Racing Exhaust on Your Acura Rsx

by

Installing a Megan Racing exhaust on your Acura RSX can enhance performance and sound. This guide will provide a detailed, step-by-step process to help you through the installation.

Tools and Materials Needed

Before starting the installation, gather the following tools and materials:

  • Socket wrench set
  • Ratchet
  • Torque wrench
  • Jack and jack stands
  • Safety goggles
  • Gloves
  • Megan Racing exhaust system
  • New gaskets (if necessary)

Preparation Steps

Before you begin the actual installation, it’s crucial to prepare your workspace and vehicle.

  • Park your Acura RSX on a flat surface.
  • Engage the parking brake.
  • Put on safety goggles and gloves.
  • Lift the rear of the vehicle using a jack and secure it with jack stands.

Removing the Old Exhaust System

Follow these steps to remove the existing exhaust system:

  • Locate the exhaust hangers and use a lubricant to ease removal.
  • Remove any bolts or clamps securing the exhaust using a socket wrench.
  • Carefully detach the exhaust from the catalytic converter.
  • Remove the old exhaust system from the vehicle.

Installing the Megan Racing Exhaust

Now, it’s time to install the new Megan Racing exhaust:

  • Align the Megan Racing exhaust with the catalytic converter.
  • Secure it using the provided bolts and clamps.
  • Ensure the exhaust is properly positioned and does not touch any other components.
  • Install new gaskets if necessary to prevent leaks.

Securing the Exhaust System

Once the exhaust is in place, follow these steps to secure it:

  • Tighten all bolts and clamps using a torque wrench to the manufacturer’s specifications.
  • Check all connections for proper alignment.
  • Ensure that all hangers are securely in place.

Final Checks

Before lowering the vehicle, perform these final checks:

  • Inspect for any signs of leaks or loose connections.
  • Make sure the exhaust does not come into contact with the vehicle’s body.
  • Double-check that all tools are removed from under the car.

Lowering the Vehicle

Carefully lower your Acura RSX back to the ground:

  • Use the jack to lift the vehicle slightly.
  • Remove the jack stands.
  • Lower the vehicle completely and remove the jack.

Testing the New Exhaust

After installation, it’s essential to test the new exhaust:

  • Start the engine and listen for any unusual noises.
  • Check for leaks around the connections.
  • Take the vehicle for a short drive to ensure everything is functioning correctly.

Conclusion

Installing a Megan Racing exhaust on your Acura RSX is a straightforward process that can greatly enhance your vehicle’s performance and sound. By following this step-by-step guide, you can ensure a successful installation.