Step-by-step Guide to Installing a Mishimoto Cold Air Intake on the G70 3.3t for +35 Hp

by

Installing a Mishimoto Cold Air Intake on your G70 3.3T can enhance performance significantly, offering a boost of up to +35 horsepower. This step-by-step guide will help you navigate the installation process with ease.

Tools and Materials Needed

  • Mishimoto Cold Air Intake Kit
  • Socket wrench set
  • Flathead screwdriver
  • Phillips screwdriver
  • Torque wrench
  • Rubber gloves
  • Shop towel
  • Safety glasses

Before starting the installation, ensure you have all the necessary tools and materials at hand. This will streamline the process and minimize interruptions.

Preparation Steps

Before installing the cold air intake, it’s essential to prepare your vehicle and workspace. Follow these preparation steps:

  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the negative battery terminal to prevent any electrical issues.
  • Allow the engine to cool down completely before starting.

Removing the Stock Air Intake

To install the Mishimoto Cold Air Intake, you first need to remove the stock air intake system. Follow these steps:

  • Locate the stock air intake assembly on the engine bay.
  • Use the socket wrench to remove the bolts securing the air intake cover.
  • Disconnect any electrical connectors attached to the air intake.
  • Carefully detach the intake hose from the throttle body.
  • Remove the entire stock air intake assembly from the vehicle.

Installing the Mishimoto Cold Air Intake

With the stock intake removed, you can now install the Mishimoto Cold Air Intake. Follow these steps for a successful installation:

  • Begin by placing the new Mishimoto intake tube in position.
  • Connect the intake tube to the throttle body and secure it with the provided clamps.
  • Install the air filter onto the intake tube and tighten it securely.
  • Reconnect any electrical connectors that were removed during the disassembly.
  • Ensure all connections are tight and secure to prevent any air leaks.

Finalizing the Installation

After installing the cold air intake, it’s important to finalize the installation properly. Follow these steps:

  • Double-check all connections and ensure everything is secured.
  • Reconnect the negative battery terminal.
  • Start the engine and let it idle for a few minutes.
  • Check for any unusual noises or air leaks.
  • Take the vehicle for a test drive to experience the performance improvement.

Maintenance Tips

To ensure your Mishimoto Cold Air Intake continues to perform optimally, follow these maintenance tips:

  • Regularly inspect the air filter for dirt and debris.
  • Clean the air filter as recommended by the manufacturer.
  • Check all connections periodically to ensure they remain secure.
  • Monitor engine performance and address any issues promptly.

Conclusion

Installing a Mishimoto Cold Air Intake on your G70 3.3T is a rewarding project that can significantly enhance your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased horsepower.