Step-by-step Guide to Installing a Rigid Industries Sr Series Light Bar on Your Truck

by

Installing a Rigid Industries SR Series Light Bar on your truck can enhance visibility and improve safety during nighttime driving. This step-by-step guide will walk you through the installation process, ensuring you achieve the best results.

Tools and Materials Needed

  • Rigid Industries SR Series Light Bar
  • Mounting brackets
  • Wiring harness
  • Drill and drill bits
  • Socket set
  • Screwdriver
  • Electrical tape
  • Heat shrink tubing

Step 1: Prepare Your Truck

Before starting the installation, ensure your truck is parked on a flat surface and the ignition is turned off. Gather all the tools and materials needed for the installation.

Step 2: Choose the Mounting Location

Select a suitable location on your truck for the light bar. Common locations include the front bumper or the roof. Make sure the location allows for optimal light output and does not obstruct your view.

Step 3: Install the Mounting Brackets

Using your drill, install the mounting brackets according to the manufacturer’s instructions. Ensure they are securely attached and can support the weight of the light bar.

Step 4: Attach the Light Bar

Carefully place the Rigid Industries SR Series Light Bar onto the mounted brackets. Use the provided hardware to secure the light bar in place. Double-check that it is level and properly aligned.

Step 5: Connect the Wiring Harness

Locate the wiring harness and connect it to the light bar. Follow the color-coded instructions provided in the light bar’s manual. Ensure all connections are tight and secure.

Step 6: Route the Wires

Route the wires from the light bar to the battery or switch location. Avoid sharp edges and moving parts to prevent damage to the wiring. Use zip ties to secure the wires in place.

Step 7: Connect to the Battery

Connect the wiring harness to the battery, following the manufacturer’s instructions. Ensure that the positive and negative connections are correct to avoid electrical issues.

Step 8: Test the Light Bar

Before finalizing the installation, test the light bar to ensure it functions correctly. Turn on the ignition and activate the light bar using the switch. Check for any flickering or issues.

Step 9: Secure and Protect the Wiring

Once you confirm that the light bar is working, secure all wiring using electrical tape and heat shrink tubing. This will protect the connections from moisture and dirt.

Step 10: Final Inspection

Conduct a final inspection of the installation. Make sure all components are secure and that there are no loose wires. Clean up any tools or debris from the installation area.

Conclusion

Installing a Rigid Industries SR Series Light Bar on your truck can significantly improve your visibility during night drives. By following these steps carefully, you can ensure a successful installation that enhances both safety and style.