Table of Contents
Installing a Southbend Performance Flywheel on your Mustang GT can significantly improve your vehicle’s performance. This guide will walk you through the step-by-step process to ensure a successful installation.
Tools and Materials Needed
- Southbend Performance Flywheel
- Socket set
- Torque wrench
- Jack and jack stands
- Flywheel alignment tool
- Transmission fluid
- Safety glasses
- Mechanic’s gloves
Preparation Steps
Before starting the installation, ensure you have a clean workspace and all necessary tools and materials at hand. Follow these preparation steps:
- Disconnect the battery to prevent any electrical issues.
- Raise the car using a jack and secure it with jack stands.
- Remove any underbody panels if necessary for access.
Removing the Old Flywheel
Now that your Mustang GT is prepared, follow these steps to remove the old flywheel:
- Remove the transmission by disconnecting the necessary bolts and components.
- Support the transmission with a jack as you remove it.
- Once the transmission is out, locate the old flywheel.
- Remove the bolts securing the old flywheel using a socket set.
- Carefully take off the old flywheel and inspect the surface for any damage.
Installing the Southbend Performance Flywheel
With the old flywheel removed, it’s time to install the new Southbend Performance Flywheel:
- Place the new flywheel onto the engine, ensuring it aligns properly with the dowel pins.
- Use the flywheel alignment tool to hold the flywheel in place.
- Tighten the flywheel bolts by hand initially, then use a torque wrench to tighten them to the manufacturer’s specifications.
- Double-check the alignment and tightness of the flywheel.
Reinstalling the Transmission
After the new flywheel is securely in place, you can proceed to reinstall the transmission:
- Carefully lift the transmission back into place with the jack.
- Reconnect all necessary components and bolts to secure the transmission.
- Ensure that the transmission is properly aligned with the flywheel.
Final Steps
Once the transmission is reinstalled, follow these final steps to complete the installation:
- Reconnect the battery.
- Check the transmission fluid level and add fluid if necessary.
- Start the engine and listen for any unusual noises.
- Take the vehicle for a test drive to ensure everything is functioning properly.
Conclusion
Installing a Southbend Performance Flywheel on your Mustang GT can enhance your driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of improved performance.