Table of Contents
Installing a Southern Stainless Exhaust on your Chevy Silverado can enhance your vehicle’s performance and sound. This step-by-step guide will walk you through the process to ensure a successful installation.
Tools and Materials Needed
- Southern Stainless Exhaust Kit
- Socket set
- Wrench set
- Jack and jack stands
- Safety goggles
- Gloves
- Exhaust hanger removal tool
- Lubricant spray
Preparation
Before starting the installation, ensure your vehicle is parked on a flat surface. Engage the parking brake and wear safety goggles and gloves for protection.
Step 1: Raise the Vehicle
Using a jack, lift the rear of your Chevy Silverado and secure it with jack stands. This will provide you with enough space to work comfortably under the vehicle.
Step 2: Remove the Old Exhaust System
Start by using the socket set to remove the bolts connecting the old exhaust to the headers. Once the bolts are removed, use the exhaust hanger removal tool to detach the exhaust hangers from the chassis.
Carefully lower the old exhaust system and remove it from under the vehicle. Be cautious as the exhaust may still contain some residual heat.
Installing the Southern Stainless Exhaust
Now that the old exhaust is removed, it’s time to install the new Southern Stainless Exhaust. Follow these steps closely.
Step 3: Assemble the Exhaust Components
Unpack the Southern Stainless Exhaust kit and lay out all components. Familiarize yourself with the parts, including pipes, muffler, and tips.
Step 4: Install the Muffler
Begin by attaching the muffler to the headers using the provided clamps and bolts. Ensure that the muffler is oriented correctly, with the inlet facing the headers.
Step 5: Install the Exhaust Pipes
Next, connect the exhaust pipes to the muffler. Use lubricant spray on the hangers to make installation easier. Slide the pipes into the muffler and secure them with clamps.
Step 6: Attach Exhaust Tips
Finally, attach the exhaust tips to the end of the pipes. Make sure they are positioned evenly and securely fastened using the provided hardware.
Final Checks and Lowering the Vehicle
Once everything is connected, double-check all bolts and clamps to ensure they are tight. Inspect the exhaust for any signs of misalignment.
Step 7: Lower the Vehicle
Carefully remove the jack stands and lower the vehicle back to the ground. Start the engine and listen for any unusual sounds, ensuring there are no leaks in the exhaust system.
Conclusion
Installing a Southern Stainless Exhaust on your Chevy Silverado can greatly improve its performance and sound. By following this step-by-step guide, you should be able to complete the installation with ease.