Table of Contents
Installing a Summit Racing Performance Exhaust on your Tri-Five Chevy can enhance both its performance and sound. This step-by-step guide will walk you through the entire installation process, ensuring you achieve the best results while enjoying the journey of working on your classic car.
Tools and Materials Needed
- Summit Racing Performance Exhaust Kit
- Socket set
- Wrench set
- Torque wrench
- Jack and jack stands
- Cutting tool (if necessary)
- Safety glasses
- Gloves
Before starting the installation, gather all the necessary tools and materials. Ensure you have a clean workspace and that your Tri-Five Chevy is parked on a flat surface.
Step 1: Prepare Your Vehicle
Begin by lifting your Tri-Five Chevy using a jack and securing it with jack stands. This will provide you with ample space to work underneath the vehicle.
Safety First
Always wear safety glasses and gloves to protect yourself from debris and sharp edges during the installation process.
Step 2: Remove the Old Exhaust System
Locate the existing exhaust system. Start by loosening the clamps and bolts that hold the old exhaust in place. Use your socket and wrench set for this task.
If the exhaust pipes are rusted or stuck, you may need to use a cutting tool to remove them. Be cautious and ensure you do not damage any surrounding components.
Step 3: Unbox the Summit Racing Performance Exhaust Kit
Carefully unbox the Summit Racing Performance Exhaust Kit. Lay out all components and ensure you have everything you need for installation. Refer to the included instruction manual for specific details about your kit.
Step 4: Install the New Exhaust System
Begin by positioning the new exhaust components under your vehicle. Start with the header pipes and work your way back towards the tailpipe. Align each piece carefully to ensure a proper fit.
Connecting the Pieces
Use the provided clamps and bolts to secure each piece of the exhaust system. Make sure to tighten them sufficiently, but avoid overtightening, which can damage the components.
Step 5: Check for Proper Alignment
Once all components are installed, check for proper alignment. Ensure that there are no contact points with the chassis or other parts of the car. Adjust as necessary to achieve a clean fit.
Step 6: Torque the Bolts
Using a torque wrench, tighten all bolts to the specifications provided in the installation manual. This step is crucial for ensuring the longevity and performance of your exhaust system.
Step 7: Recheck All Connections
Before lowering your vehicle, double-check all connections and clamps. Make sure everything is secure and properly aligned. This will help prevent any exhaust leaks or issues while driving.
Step 8: Lower the Vehicle
Carefully lower your Tri-Five Chevy back to the ground using the jack. Once it is securely on the ground, remove the jack stands.
Step 9: Test the Exhaust System
Start your engine and listen for any unusual sounds. Check for leaks around the connections and ensure that the exhaust system operates smoothly. If everything sounds good, you are ready to hit the road!
Step 10: Enjoy Your New Exhaust System
With your new Summit Racing Performance Exhaust installed, enjoy the enhanced performance and sound of your Tri-Five Chevy. Take it for a drive and appreciate the difference it makes!
Conclusion
Installing a Summit Racing Performance Exhaust on your Tri-Five Chevy is a rewarding project that can improve your vehicle’s performance and sound. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your hard work.