Table of Contents
The Dodge Challenger 6.2 Hellcat is a powerful machine that has captured the hearts of car enthusiasts. With its impressive horsepower, many owners look to enhance its performance even further by installing a supercharger. This guide will walk you through the step-by-step process of installing a supercharger on your Dodge Challenger 6.2 Hellcat to achieve 800+ horsepower.
Understanding Superchargers
Before diving into the installation process, it’s essential to understand what a supercharger does and how it enhances your vehicle’s performance.
- A supercharger compresses the air entering the engine, allowing for more air and fuel to be burned.
- This increase in air and fuel results in a significant boost in horsepower and torque.
- Superchargers can be either positive displacement or centrifugal, each with its advantages.
Tools and Materials Needed
Gathering the right tools and materials is crucial for a successful installation. Here’s what you’ll need:
- Supercharger kit specific to the Dodge Challenger 6.2 Hellcat
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Jack and jack stands
- Coolant
- Engine oil
- Safety goggles and gloves
Preparation for Installation
Proper preparation can make the installation process smoother. Follow these steps before starting the installation:
- Ensure your vehicle is parked on a flat surface and the engine is cool.
- Disconnect the battery to prevent any electrical issues during installation.
- Remove any components that may obstruct access to the engine, such as the air intake and engine covers.
Step-by-Step Installation Process
Now, let’s dive into the actual installation of the supercharger.
Step 1: Remove the Stock Supercharger
Start by removing the stock supercharger. Follow these sub-steps:
- Remove the intake manifold bolts and carefully lift the manifold off.
- Disconnect all electrical connectors and hoses attached to the supercharger.
- Unbolt the supercharger from the engine and remove it from the engine bay.
Step 2: Install the New Supercharger
With the stock supercharger removed, you can now install the new supercharger.
- Place the new supercharger onto the engine, aligning it with the mounting holes.
- Secure the supercharger with the provided bolts, tightening them to the manufacturer’s specifications.
- Reconnect all electrical connectors and hoses that were removed earlier.
Step 3: Reinstall the Intake Manifold
Once the supercharger is secured, it’s time to reinstall the intake manifold.
- Position the intake manifold over the supercharger.
- Insert and tighten the manifold bolts to secure it in place.
- Reconnect any hoses or connectors that were previously detached.
Step 4: Add Coolant and Oil
After the supercharger and intake manifold are installed, it’s essential to add coolant and oil.
- Fill the supercharger with the appropriate coolant as specified in the installation manual.
- Check the engine oil level and add oil if necessary.
Step 5: Reconnect the Battery and Test
With everything installed and fluids added, you can now reconnect the battery and start the engine.
- Start the engine and listen for any unusual noises.
- Check for any leaks around the supercharger and hoses.
- Take the vehicle for a test drive to ensure everything is functioning correctly.
Tuning Your Challenger
After installing the supercharger, tuning your Dodge Challenger is essential to maximize performance and ensure reliability.
- Consider having a professional tune the engine to accommodate the new supercharger.
- Monitor engine performance and adjust as necessary.
- Regularly check fluid levels and perform maintenance to keep your vehicle running smoothly.
Conclusion
Installing a supercharger on your Dodge Challenger 6.2 Hellcat can significantly enhance its performance, pushing it to over 800 horsepower. By following this step-by-step guide, you can successfully complete the installation and enjoy the exhilarating power of your upgraded vehicle. Always remember to prioritize safety and consult with professionals when necessary.