Table of Contents
Installing a supercharger on your Dodge Durango SRT can significantly enhance its performance. This step-by-step guide will walk you through the entire process, ensuring you have the knowledge and tools necessary for a successful installation.
Tools and Materials Needed
- Supercharger kit specific to Dodge Durango SRT
- Socket set
- Wrenches
- Torque wrench
- Ratchet
- Phillips and flathead screwdrivers
- Vacuum line kit
- Fuel line disconnect tool
- Coolant
- Oil for supercharger (if required)
- Safety glasses and gloves
Preparation Steps
Before starting the installation, it’s important to prepare your workspace and the vehicle. Follow these steps to ensure a smooth process.
- Park your Dodge Durango SRT on a flat surface and engage the parking brake.
- Disconnect the negative battery terminal to prevent electrical issues.
- Remove any engine covers and components that obstruct access to the engine.
- Gather all tools and materials in your workspace.
Removing the Stock Components
The next step is to remove the stock components that will be replaced by the supercharger. This includes the intake manifold and any associated parts.
- Remove the intake manifold by unbolting it from the engine.
- Disconnect any sensors or hoses attached to the manifold.
- Set the manifold aside in a safe location.
- Remove the air intake system, including the throttle body.
Installing the Supercharger
Now it’s time to install the supercharger. Follow these steps carefully to ensure proper installation.
- Position the supercharger onto the engine where the intake manifold was removed.
- Secure the supercharger with the provided bolts, following the manufacturer’s torque specifications.
- Reconnect any sensors or hoses that were disconnected during the removal of the stock components.
- Install the new intake manifold that comes with the supercharger kit.
Connecting the Supercharger
After the supercharger is secured, connect it to the engine and other components.
- Attach the supercharger’s vacuum lines according to the installation manual.
- Connect the fuel lines using the fuel line disconnect tool.
- Install the new throttle body onto the supercharger.
- Ensure all connections are tight and secure.
Final Steps and Testing
Once everything is connected, it’s time to finalize the installation and test the vehicle.
- Refill the coolant and check for any leaks.
- Reconnect the negative battery terminal.
- Start the engine and let it idle for a few minutes.
- Check the supercharger for any unusual noises or leaks during idle.
- Take the vehicle for a test drive to ensure everything is functioning properly.
Conclusion
Installing a supercharger on your Dodge Durango SRT can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.