Table of Contents
Installing an AEM cold air intake on your Mitsubishi Eclipse can significantly enhance its performance. This step-by-step guide will walk you through the process, ensuring you have a smooth installation experience.
Tools and Materials Needed
- AEM cold air intake kit
- Socket wrench set
- Flathead screwdriver
- Phillips screwdriver
- Ratchet and extension
- Torque wrench
- Shop towels
- Safety glasses
Preparation
Before you begin the installation, ensure that your workspace is clean and organized. Gather all the tools and materials listed above. It’s also recommended to wear safety glasses to protect your eyes from debris.
Step 1: Remove the Factory Intake System
Start by disconnecting the negative battery terminal to prevent any electrical issues. Next, locate the factory air intake system, which includes the air filter box, intake tubing, and mass air flow sensor.
- Use a socket wrench to remove the bolts holding the air filter box.
- Disconnect the mass air flow sensor wiring harness.
- Loosen the hose clamps on the intake tubing and remove the tubing.
- Take out the air filter box and set it aside.
Step 2: Install the AEM Cold Air Intake
Now that the factory intake is removed, it’s time to install the AEM cold air intake. Begin by laying out the components of the AEM kit to familiarize yourself with each part.
- Insert the AEM intake tube into the engine bay.
- Connect the mass air flow sensor to the new intake tube.
- Secure the intake tube using the provided hose clamps.
- Attach the AEM air filter to the end of the intake tube.
Step 3: Secure All Connections
After installing the intake, ensure that all connections are tight and secure. This will prevent any air leaks that could affect performance.
- Double-check the hose clamps on the intake tube and air filter.
- Ensure the mass air flow sensor is properly connected.
Step 4: Reconnect the Battery
Once everything is secured, reconnect the negative battery terminal. This will restore power to your vehicle.
Step 5: Test the Installation
Start your Mitsubishi Eclipse and listen for any unusual sounds. A properly installed cold air intake should operate smoothly. Take the car for a test drive to experience the performance improvements.
Conclusion
Installing an AEM cold air intake on your Mitsubishi Eclipse is a straightforward process that can yield significant performance benefits. By following this step-by-step guide, you can enhance your vehicle’s efficiency and responsiveness.
Always refer to the AEM installation manual for specific instructions related to your model. Happy driving!