Step-by-step Guide to Installing an Aem Intake on a $300 Budget

by

Installing an AEM intake system can significantly enhance your vehicle’s performance. This guide will walk you through the step-by-step process of installing an AEM intake on a budget of $300.

Understanding AEM Intakes

AEM intakes are designed to improve airflow to your engine, resulting in better performance and efficiency. They come with high-quality filters and are easy to install.

Budget Breakdown

Here’s a breakdown of the costs you might incur while installing an AEM intake:

  • AEM Intake Kit: $250
  • Basic Tools (if not already owned): $50

Tools Required

Gather the following tools before starting the installation:

  • Screwdriver set
  • Socket wrench set
  • Pliers
  • Torque wrench
  • Shop towels

Step-by-Step Installation Process

Step 1: Preparation

Before you start, make sure the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues.

Step 2: Remove the Stock Intake

Using your screwdriver and socket wrench, remove the screws and bolts that hold the stock intake in place. Carefully detach it from the engine.

Step 3: Install the AEM Intake

Take the AEM intake out of the box and compare it with the stock intake to ensure you have all the necessary components. Begin installing the AEM intake by attaching the filter to the intake pipe.

Step 4: Secure the Intake

Position the intake in the engine bay and secure it with the original mounting points. Use your torque wrench to ensure that all bolts are tightened to the manufacturer’s specifications.

Step 5: Reconnect the Battery

Once the intake is securely in place, reconnect the negative battery terminal. Make sure everything is properly connected and secure.

Step 6: Final Checks

Start the engine and listen for any unusual noises. Check for any air leaks around the intake area. If everything sounds good, you’re ready to hit the road!

Tips for a Successful Installation

Here are some tips to ensure your installation goes smoothly:

  • Read the AEM installation manual thoroughly.
  • Take your time and don’t rush the process.
  • Keep your workspace organized to avoid losing parts.
  • Have a friend assist you for easier handling of parts.

Conclusion

Installing an AEM intake can be a rewarding DIY project that enhances your vehicle’s performance. By following this guide, you can complete the installation within a budget of $300 and enjoy the benefits of improved airflow and efficiency.