Step-by-step Guide to Installing an Ats Big Turbo Kit on Your Ms3

by

Installing an ATS Big Turbo Kit on your MazdaSpeed3 (MS3) can significantly enhance performance. This guide will provide you with a step-by-step approach to ensure a successful installation. Make sure you have all necessary tools and parts before you begin.

Tools and Materials Needed

  • ATS Big Turbo Kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Oil catch can
  • Intercooler piping
  • Silicone couplers
  • Clamps
  • Gasket maker

Preparation Steps

Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during the process.

Remove the Existing Turbo

Begin by removing the factory turbocharger. Follow these steps:

  • Remove the intake manifold and any associated components.
  • Disconnect all electrical connections and hoses linked to the turbo.
  • Unbolt the turbo from the exhaust manifold.
  • Carefully take out the turbo, ensuring no debris falls into the engine.

Prepare the Installation Area

Clean the mounting area thoroughly. Remove any old gaskets or debris to ensure a proper seal when installing the new turbo.

Installation of the ATS Big Turbo Kit

Now that the old turbo is removed and the area is prepared, it’s time to install the ATS Big Turbo Kit. Follow these steps:

  • Position the new turbo in place and align it with the exhaust manifold.
  • Secure the turbo using the provided bolts, tightening them to the manufacturer’s specifications.
  • Reconnect all hoses, electrical connections, and the intake manifold.
  • Install the new intercooler piping using silicone couplers and clamps for a secure fit.

Check for Leaks

Before starting the engine, double-check all connections and ensure there are no leaks. Use a flashlight to inspect the turbo area for any signs of improper sealing.

Final Steps

Once everything is installed and checked, proceed with the following final steps:

  • Reconnect the negative battery terminal.
  • Start the engine and let it idle for a few minutes to check for any unusual noises.
  • Monitor the oil pressure and temperatures to ensure everything is functioning correctly.
  • Take the car for a short test drive to assess performance and make sure there are no leaks.

Conclusion

Installing an ATS Big Turbo Kit on your MazdaSpeed3 can be a rewarding experience that significantly boosts your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the enhanced power of your MS3.