Table of Contents
Installing an AWE Tuning Cold Air Intake on your B5 S4 can enhance performance and provide a more aggressive sound. This guide will take you through the installation process step-by-step, ensuring you have everything you need to complete the job efficiently.
Tools and Materials Needed
- AWE Tuning Cold Air Intake Kit
- Socket set (10mm and 13mm)
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Rubber gloves
- Shop towel or rag
Preparation
Before you begin the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Gather all tools and materials to avoid interruptions during the process.
Step 1: Remove the Engine Cover
Using a socket wrench, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside.
Step 2: Disconnect the Factory Air Intake
Locate the factory air intake system. Use a flathead screwdriver to loosen the clamps holding the intake tube in place. Disconnect the mass air flow (MAF) sensor by gently pulling it off.
Step 3: Remove the Factory Air Box
Unscrew the bolts securing the factory air box to the vehicle. Once loose, carefully lift the air box out and set it aside.
Step 4: Install the AWE Tuning Cold Air Intake
Take the AWE Tuning Cold Air Intake and position it where the factory air box was located. Secure it in place using the provided hardware and torque to specifications.
Step 5: Connect the MAF Sensor
Reconnect the MAF sensor to the new intake tube. Ensure it is seated properly and the connection is secure.
Step 6: Attach the Intake Tube
Attach the intake tube to the throttle body, ensuring the clamps are tight. Double-check all connections to ensure they are secure and leak-free.
Step 7: Reinstall the Engine Cover
Place the engine cover back on and secure it with the bolts you removed earlier. Make sure everything is aligned properly.
Step 8: Final Checks
Before starting the engine, double-check all connections and ensure that no tools or materials are left in the engine bay. Start the engine and listen for any unusual sounds.
Conclusion
Congratulations! You have successfully installed an AWE Tuning Cold Air Intake on your B5 S4. Enjoy the improved performance and sound that comes with your new intake system.