Table of Contents
Installing Falken Wildpeak M/T tires on your 2022 Silverado can enhance its off-road capability and provide a rugged look. This step-by-step guide will walk you through the entire process, ensuring a smooth installation.
Tools and Materials Needed
- Falken Wildpeak M/T tires
- Jack and jack stands
- Tire iron or lug wrench
- Torque wrench
- Valve stem tool
- Air compressor or tire inflator
- Safety glasses
- Gloves
Preparation Steps
Before beginning the installation, ensure you have all the necessary tools and materials ready. Make sure to wear safety glasses and gloves for protection.
1. Park Your Vehicle
Choose a flat, stable surface to park your Silverado. Engage the parking brake to prevent any movement during the installation.
2. Loosen the Lug Nuts
Using a tire iron or lug wrench, slightly loosen the lug nuts on each wheel while the vehicle is still on the ground. Turn counterclockwise to loosen.
Jack Up the Vehicle
Once the lug nuts are loosened, use the jack to lift the vehicle. Make sure to place jack stands under the vehicle for safety.
Removing the Old Tires
1. Remove the Lug Nuts
With the vehicle securely elevated, fully remove the loosened lug nuts from each wheel and set them aside in a safe place.
2. Take Off the Old Tires
Carefully pull the old tire off the wheel hub. You may need to wiggle it a bit to get it free. Set the old tire aside.
Installing the Falken Wildpeak M/T Tires
1. Position the New Tire
Align the Falken Wildpeak M/T tire with the wheel hub and carefully push it onto the hub. Ensure that the tire is seated properly.
2. Hand-Tighten the Lug Nuts
Once the tire is in place, hand-tighten the lug nuts onto the wheel studs. Make sure they are snug but not fully tightened yet.
Lowering the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once the vehicle is on the ground, remove the jack stands.
Tightening the Lug Nuts
Using a torque wrench, tighten the lug nuts to the manufacturer’s recommended torque specifications. This step is crucial for safety and performance.
Inflating the Tires
Check the tire pressure using a tire gauge. Inflate the Falken Wildpeak M/T tires to the recommended PSI as indicated on the tire sidewall.
Final Checks
After installing all four tires, double-check the lug nut tightness and tire pressure. Make sure everything is secure before taking your Silverado for a test drive.
Conclusion
Installing Falken Wildpeak M/T tires on your 2022 Silverado is a straightforward process that can be completed with basic tools. Following these steps will ensure a successful installation and improved performance on and off the road.