Step-by-step Guide to Installing Hre Wheels on a 500 Hp Lexus Rc F

by

Installing HRE wheels on a 500 HP Lexus RC F can enhance both the performance and aesthetics of your vehicle. This guide will walk you through the process step-by-step, ensuring a successful installation.

Tools and Materials Needed

  • HRE Wheels
  • Torque wrench
  • Jack and jack stands
  • Lug nut socket
  • Wheel cleaner
  • Brake cleaner
  • Rags

Preparation Steps

Before starting the installation, ensure that you have all the necessary tools and materials ready. Follow these preparation steps:

  • Park your Lexus RC F on a flat surface.
  • Engage the parking brake.
  • Loosen the lug nuts on each wheel slightly without removing them.

Jack Up the Vehicle

Using a jack, lift the vehicle and secure it with jack stands. Follow these steps:

  • Locate the jacking points under the vehicle.
  • Place the jack under the jacking point and lift the vehicle.
  • Insert jack stands for safety.

Remove the Stock Wheels

With the vehicle securely lifted, proceed to remove the stock wheels:

  • Fully remove the loosened lug nuts.
  • Carefully take off the stock wheel.
  • Repeat for all four wheels.

Clean the Wheel Hubs

Before installing the new wheels, it’s important to clean the wheel hubs:

  • Use brake cleaner to spray the wheel hubs.
  • Wipe the surface with a rag to remove dirt and debris.

Install HRE Wheels

Now it’s time to install the HRE wheels:

  • Align the wheel with the hub and slide it onto the hub.
  • Hand-tighten the lug nuts onto the wheel bolts.
  • Repeat the process for all four wheels.

Torque the Lug Nuts

Once all wheels are installed, it’s crucial to torque the lug nuts to the manufacturer’s specifications:

  • Set your torque wrench to the specified torque value.
  • Torque each lug nut in a crisscross pattern.

Lower the Vehicle

With the wheels securely torqued, it’s time to lower the vehicle:

  • Remove the jack stands carefully.
  • Lower the vehicle using the jack.

Final Checks

After lowering the vehicle, perform these final checks:

  • Ensure all lug nuts are properly torqued.
  • Check the wheel alignment and balance.
  • Inspect for any clearance issues.

Conclusion

Installing HRE wheels on your 500 HP Lexus RC F can significantly enhance its performance and style. By following this step-by-step guide, you can ensure a successful installation. Enjoy your upgraded ride!