Table of Contents
Installing TEIN coilovers on your Acura Integra Type R can significantly enhance handling performance. This step-by-step guide will walk you through the process, ensuring a smooth installation and improved driving experience.
Tools and Materials Needed
- TEIN coilover kit
- Jack and jack stands
- Socket set
- Wrench set
- Spring compressor
- Torque wrench
- Pliers
- Grease
- Safety glasses
- Work gloves
Preparation Steps
Before beginning the installation, ensure that you have all the necessary tools and materials on hand. Follow these preparation steps:
- Park your Acura Integra Type R on a flat surface.
- Engage the parking brake to prevent any movement.
- Wear safety glasses and gloves for protection.
- Gather all tools and materials in one place.
Removing the Stock Suspension
To install the TEIN coilovers, you must first remove the stock suspension. Follow these steps:
- Use a jack to lift the front of the car and secure it with jack stands.
- Remove the front wheels using a socket wrench.
- Disconnect the brake line bracket from the strut assembly.
- Remove the bolt securing the strut to the steering knuckle.
- Unbolt the strut from the top mount under the hood.
- Carefully remove the strut assembly from the vehicle.
- Repeat the process for the rear suspension.
Preparing the TEIN Coilovers
With the stock suspension removed, it’s time to prepare the TEIN coilovers for installation.
- Inspect the coilovers for any damage or defects.
- Apply grease to the threads of the coilovers for smooth adjustment.
- Set the desired ride height by adjusting the lower mount on the coilover.
- Ensure that the spring is properly seated in the coilover.
Installing the TEIN Coilovers
Now that the coilovers are prepared, it’s time to install them in your Acura Integra Type R.
- Begin with the front coilovers. Insert the coilover into the strut tower and secure it with the top mount bolts.
- Reconnect the strut to the steering knuckle using the previously removed bolt.
- Reconnect the brake line bracket to the strut assembly.
- Repeat the process for the rear coilovers, ensuring proper alignment.
- Double-check all bolts and connections for tightness.
Final Adjustments and Testing
After installing the coilovers, you will need to make some final adjustments and test the vehicle.
- Lower the vehicle back to the ground and remove the jack stands.
- Check the ride height and make any necessary adjustments.
- Take the car for a test drive to evaluate handling and comfort.
- Re-check all bolts and connections after the test drive.
Conclusion
Installing TEIN coilovers on your Acura Integra Type R can greatly improve handling and driving dynamics. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of enhanced performance.