Table of Contents
The W205 C63 is a powerful vehicle that deserves an equally powerful exhaust system. Installing the Akrapovic exhaust can enhance performance and sound. This guide will walk you through the step-by-step process of installing the Akrapovic exhaust on your W205 C63.
Tools and Materials Needed
- Akrapovic Exhaust System
- Socket Set
- Torque Wrench
- Jack and Jack Stands
- Safety Glasses
- Gloves
- Heat Resistant Spray (optional)
Before starting the installation, gather all the necessary tools and materials. Ensure you have a clean workspace and safety gear to protect yourself during the process.
Preparation
Begin by preparing your vehicle for the installation. Follow these steps:
- Park the car on a level surface.
- Engage the parking brake.
- Use a jack to lift the rear of the vehicle and secure it with jack stands.
- Allow the exhaust system to cool if the vehicle has been running.
Removing the Stock Exhaust
To install the Akrapovic exhaust, you first need to remove the stock exhaust system. Follow these steps:
- Locate the stock exhaust hangers and use a pry tool to remove them.
- Unscrew the bolts connecting the exhaust to the downpipes using the socket set.
- Carefully lower the stock exhaust from the vehicle.
- Inspect the exhaust mounting points for any damage.
Installing the Akrapovic Exhaust
Now that the stock exhaust is removed, you can proceed with installing the Akrapovic exhaust. Follow these steps:
- Position the Akrapovic exhaust under the vehicle.
- Align the exhaust with the mounting points.
- Secure the exhaust using the provided bolts, ensuring they are hand-tight.
- Reattach the exhaust hangers to secure the exhaust in place.
Final Adjustments
After the exhaust is installed, make sure everything is aligned correctly. Follow these steps:
- Check the alignment of the exhaust tips to ensure they are centered.
- Use a torque wrench to tighten the bolts to the manufacturer’s specifications.
- Double-check that all hangers are securely attached.
Testing the Exhaust
Once the installation is complete, it’s time to test the new exhaust system. Follow these steps:
- Start the engine and allow it to idle for a few minutes.
- Listen for any unusual noises that may indicate a leak.
- Rev the engine to check the sound and ensure it meets your expectations.
- Take the car for a short drive to ensure everything is functioning correctly.
Conclusion
Installing the Akrapovic exhaust on your W205 C63 can greatly enhance both performance and sound. By following this step-by-step guide, you can complete the installation process with ease. Enjoy the new sound and performance of your vehicle!