Step-by-step Guide to Installing the Eventuri Intake on Your Audi Rs7 for Better Power

by

The Audi RS7 is known for its incredible performance and luxurious features. One of the best upgrades you can make to enhance its power and efficiency is installing the Eventuri Intake system. This guide will walk you through the step-by-step process of installing the Eventuri Intake on your Audi RS7.

Tools and Materials Needed

  • Eventuri Intake System
  • Socket set
  • Screwdriver set
  • Torx bits
  • Ratchet wrench
  • Trim removal tool
  • Cleaning cloth
  • Safety glasses
  • Gloves

Before you begin the installation, make sure you have all the necessary tools and materials ready. This will ensure a smooth and efficient process.

Step 1: Prepare Your Audi RS7

Start by parking your Audi RS7 on a flat surface. Turn off the engine and allow it to cool down completely. Ensure that you have enough space to work around the engine bay.

Safety First

Wear safety glasses and gloves to protect yourself during the installation process. This will help prevent any injuries from sharp edges or debris.

Step 2: Remove the Engine Cover

Using a socket set, carefully remove the bolts securing the engine cover. Once the bolts are removed, gently lift the cover off and set it aside. Be cautious not to damage any clips or connectors during this process.

Step 3: Disconnect the OEM Intake

Locate the OEM intake system. Disconnect the intake hose by loosening the clamp with a screwdriver. Carefully pull the hose off the throttle body and set it aside.

Remove the Air Filter Box

Next, remove the air filter box by unscrewing any bolts or clips securing it in place. Lift the box out of the engine bay and set it aside. Ensure that you do not lose any screws or parts during this step.

Step 4: Install the Eventuri Intake

Take the Eventuri intake system out of the box. Begin by placing the intake tube into position, ensuring it aligns with the throttle body. Secure it in place by tightening the clamp.

Attach the Air Filter

Next, attach the Eventuri air filter to the intake tube. Ensure it is seated properly and secured with the provided clamp. This is crucial for optimal performance.

Step 5: Reinstall the Engine Cover

Once the Eventuri intake is securely in place, it’s time to reinstall the engine cover. Place it back onto the engine bay and secure it with the previously removed bolts. Ensure everything is tightened properly.

Step 6: Final Checks

Before starting your Audi RS7, double-check all connections, clamps, and bolts to ensure everything is secure. This will prevent any issues during operation.

Step 7: Start the Engine

With everything in place, start your Audi RS7. Listen for any unusual sounds and check for any air leaks around the intake area. If everything sounds good, take your car for a test drive.

Conclusion

Installing the Eventuri Intake on your Audi RS7 can significantly enhance its performance and power. By following this step-by-step guide, you can ensure a successful installation. Enjoy the improved driving experience!