Step-by-step Guide to Installing the Gr Corolla G16e-gts Modded Suspension by Kw V3

by

The GR Corolla G16E-GTS is an exciting vehicle that offers a thrilling driving experience. One of the best ways to enhance its performance is by upgrading the suspension system. This guide provides a step-by-step process for installing the modded suspension by KW V3, ensuring you get the most out of your GR Corolla.

Tools and Materials Needed

  • KW V3 suspension kit
  • Jack and jack stands
  • Socket set
  • Torque wrench
  • Spring compressors
  • Flathead screwdriver
  • Ratchet and extensions
  • Safety glasses
  • Gloves

Preparation Steps

Before starting the installation, ensure you have a clean workspace and all necessary tools and materials. Follow these preparation steps:

  • Park the car on a flat surface and engage the parking brake.
  • Gather all tools and materials in one area.
  • Put on safety glasses and gloves for protection.

Step 1: Lifting the Vehicle

To access the suspension components, you need to lift the vehicle safely. Follow these steps:

  • Using the jack, lift the front of the vehicle and place jack stands under the frame for support.
  • Repeat the process for the rear of the vehicle.
  • Ensure the vehicle is stable before proceeding.

Step 2: Removing the Stock Suspension

Now that the vehicle is lifted, you can begin removing the stock suspension. Follow these steps:

  • Start with the front suspension. Remove the wheel using the socket set.
  • Disconnect the sway bar links and any other components connected to the strut.
  • Unbolt the strut from the top mount and lower control arm.
  • Carefully remove the strut assembly from the vehicle.
  • Repeat these steps for the rear suspension.

Step 3: Preparing the KW V3 Suspension

Before installing the KW V3 suspension, you’ll need to prepare the components:

  • Assemble the new strut and spring using the spring compressors.
  • Adjust the ride height settings on the KW V3 according to your preference.
  • Ensure all components are tightened and secure.

Step 4: Installing the KW V3 Suspension

With the KW V3 suspension prepared, you can now install it into the vehicle:

  • Position the new strut assembly into place in the front suspension.
  • Secure the strut to the top mount and lower control arm using the bolts.
  • Reconnect the sway bar links and any other components.
  • Repeat the installation process for the rear suspension.

Step 5: Final Adjustments

After installing the KW V3 suspension, it’s important to make final adjustments:

  • Check all bolts and connections to ensure they are tightened to the manufacturer’s specifications.
  • Adjust the ride height and damping settings as desired.
  • Reinstall the wheels and lower the vehicle back to the ground.

Step 6: Testing the Suspension

After the installation, it’s crucial to test the new suspension to ensure everything is functioning correctly:

  • Take the vehicle for a short test drive on various road conditions.
  • Listen for any unusual noises or issues during the drive.
  • Check the alignment and make adjustments if necessary.

Conclusion

Installing the KW V3 modded suspension on your GR Corolla G16E-GTS can significantly enhance your driving experience. By following this step-by-step guide, you can ensure a successful installation that improves handling and performance. Enjoy your upgraded ride!