Step-by-step Guide to Installing the H&r Lowering Springs on Your C63 Amg

by

Step-by-Step Guide to Installing the H&R Lowering Springs on Your C63 AMG

Installing H&R lowering springs on your C63 AMG can enhance the vehicle’s handling and aesthetics. This guide provides a detailed step-by-step process to ensure a successful installation.

Tools and Materials Needed

  • H&R Lowering Springs
  • Jack and jack stands
  • Socket set
  • Wrench set
  • Spring compressor
  • Torque wrench
  • Safety glasses
  • Mechanic gloves

Preparation

Before beginning the installation, ensure you have all the necessary tools and materials. Safety is paramount, so wear safety glasses and gloves throughout the process.

Step 1: Lift the Vehicle

Use the jack to lift the front or rear of the vehicle, depending on which springs you are replacing. Secure the vehicle on jack stands to ensure stability.

Step 2: Remove the Wheels

Using the socket set, remove the lug nuts and take off the wheels to access the suspension components.

Step 3: Disassemble the Suspension

Locate the strut assembly and disconnect any components that may hinder the removal of the springs. This typically includes sway bar links and brake line brackets.

Step 4: Compress the Springs

Using the spring compressor, carefully compress the factory springs. This step is crucial for safely removing the springs from the strut assembly.

Step 5: Remove the Old Springs

Once the springs are compressed, remove the top strut nut and carefully detach the strut assembly from the vehicle. Take out the old springs.

Step 6: Install the H&R Lowering Springs

Place the H&R lowering springs onto the strut assembly. Ensure they are seated correctly and aligned with the strut mounts.

Step 7: Reassemble the Strut Assembly

Reattach the top strut nut and ensure it is tightened to the manufacturer’s specifications. Remove the spring compressor carefully.

Step 8: Reinstall the Strut Assembly

Position the strut assembly back into the vehicle and reconnect all previously removed components, including sway bar links and brake line brackets.

Step 9: Reinstall the Wheels

Put the wheels back on and hand-tighten the lug nuts. Once all wheels are on, lower the vehicle back to the ground.

Step 10: Torque the Lug Nuts

Using a torque wrench, tighten the lug nuts to the specified torque setting. This ensures that the wheels are securely fastened.

Final Checks

After installation, check all connections and components to ensure everything is secure. It’s also advisable to have a professional alignment done after lowering the vehicle.

Conclusion

Installing H&R lowering springs on your C63 AMG can significantly improve its handling and appearance. Following this step-by-step guide will help ensure a successful installation.