Table of Contents
Installing an AVO Turbo Kit on your WRX can significantly enhance your vehicle’s performance and efficiency. This guide provides a comprehensive step-by-step process to ensure a successful installation.
Tools and Materials Needed
- AVO Turbo Kit
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Jack and jack stands
- Oil catch pan
- Coolant
- Vacuum hose
- Clamps and fittings
Preparation Steps
Before starting the installation, ensure that you have a clean workspace and all necessary tools and materials at hand. It is also advisable to read through the AVO Turbo Kit manual for specific instructions related to your model.
1. Safety First
Make sure to wear appropriate safety gear, including gloves and goggles. Disconnect the battery to prevent any electrical issues during the installation.
2. Lift the Vehicle
Use a jack to lift the front of your WRX and secure it with jack stands. This will provide you with better access to the engine bay and undercarriage.
Removing the Stock Turbo
Begin by removing the stock turbocharger from your WRX. Follow these steps carefully to avoid damaging any components.
1. Remove the Intake and Exhaust Components
Detach the intake system and exhaust components connected to the stock turbo. This includes the downpipe, intercooler piping, and any associated sensors.
2. Disconnect Oil and Coolant Lines
Carefully disconnect the oil and coolant lines from the stock turbo. Use an oil catch pan to collect any fluids that may spill during this process.
3. Unbolt the Turbocharger
Unbolt the stock turbocharger from the exhaust manifold. Make sure to keep track of all bolts and hardware for reinstallation.
Installing the AVO Turbo Kit
With the stock turbo removed, you can now proceed to install the AVO Turbo Kit. Follow these steps for a smooth installation.
1. Position the AVO Turbo
Carefully position the AVO turbocharger onto the exhaust manifold. Ensure that it is aligned properly with the mounting points.
2. Secure the Turbo
Using the original bolts, secure the AVO turbo to the exhaust manifold. Be sure to follow the torque specifications provided in the AVO manual.
3. Reconnect Oil and Coolant Lines
Reconnect the oil and coolant lines to the AVO turbo. Ensure that all connections are tight and leak-free.
4. Install the Intake and Exhaust Components
Reinstall the intake system and exhaust components that were removed earlier. Make sure to use new gaskets where necessary to prevent leaks.
Final Steps
After the AVO Turbo Kit is installed, it’s important to perform a few final checks before starting the engine.
1. Check All Connections
Double-check all connections, including hoses, clamps, and electrical connections. Ensure everything is secure and properly fitted.
2. Refill Fluids
Refill the oil and coolant as necessary. Make sure to use the recommended fluids for your WRX.
3. Reconnect the Battery
Reconnect the battery and ensure all electrical connections are secure before starting the engine.
4. Start the Engine
Start the engine and let it idle for a few minutes. Check for any leaks or unusual noises. If everything appears normal, take your WRX for a test drive.
Conclusion
Installing an AVO Turbo Kit on your WRX can greatly improve performance and efficiency. By following these steps carefully, you can ensure a successful installation and enjoy the benefits of enhanced power and responsiveness.