Step-by-step Install of the Garrett Gtx3584rs Turbo on Your A90 Supra

by

The A90 Supra has gained immense popularity among car enthusiasts, particularly for its tuning potential. One of the most sought-after upgrades is the installation of a Garrett GTX3584RS turbocharger. This article provides a comprehensive, step-by-step guide to help you install the Garrett GTX3584RS turbo on your A90 Supra.

Tools and Materials Needed

  • Garrett GTX3584RS Turbocharger
  • Turbo manifold
  • Oil feed and return lines
  • Intercooler piping
  • Boost controller
  • Basic hand tools (wrenches, sockets, etc.)
  • Torque wrench
  • Gaskets and seals
  • Safety glasses and gloves
  • Shop towels

Preparation Steps

Before starting the installation process, it’s essential to prepare your workspace and gather all necessary tools and materials. Follow these preparation steps:

  • Park the car on a flat surface and engage the parking brake.
  • Disconnect the battery to prevent any electrical issues.
  • Remove the engine cover and any components obstructing access to the turbo area.
  • Drain the engine oil and coolant to avoid spills during the installation.

Removing the Stock Turbo

To install the Garrett GTX3584RS turbo, you must first remove the stock turbocharger. Follow these steps:

  • Disconnect the wastegate actuator and any electrical connectors.
  • Remove the intake and exhaust pipes connected to the stock turbo.
  • Unbolt the stock turbo from the manifold and carefully lift it out.
  • Inspect the area for any debris or old gaskets and clean as necessary.

Installing the Garrett GTX3584RS Turbo

With the stock turbo removed, you can now install the Garrett GTX3584RS turbo. Follow these steps carefully:

  • Place the new gasket on the turbo manifold.
  • Align the Garrett GTX3584RS turbo with the manifold and secure it using the provided bolts.
  • Connect the oil feed and return lines to the turbo, ensuring a tight fit.
  • Install the wastegate actuator and connect any necessary electrical connectors.

Connecting Intercooler and Exhaust Components

After securing the turbo, the next step is to connect the intercooler and exhaust components:

  • Attach the intercooler piping to the turbo outlet, ensuring a secure connection.
  • Connect the exhaust piping to the turbo’s outlet, using new gaskets if needed.
  • Double-check all connections for tightness and proper alignment.

Final Steps and Testing

Once everything is connected, proceed with the final steps to complete the installation:

  • Refill the engine with fresh oil and coolant.
  • Reconnect the battery and check for any loose connections.
  • Start the engine and allow it to idle for a few minutes.
  • Check for any leaks around the turbo and connections.

Conclusion

Installing the Garrett GTX3584RS turbo on your A90 Supra can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation. Always remember to consult your vehicle’s manual and consider seeking professional help if needed.