Table of Contents
Installing Motul wheel spacers on your Subaru WRX can enhance the vehicle’s stance and performance. This guide will walk you through the entire process step-by-step, ensuring a smooth installation.
What You Will Need
- Motul wheel spacers
- Jack and jack stands
- Tire iron
- Torque wrench
- Socket set
- Brake cleaner
- Rags
Preparation Steps
Before you start the installation, ensure you have all the necessary tools and parts ready. Follow these preparation steps:
- Park your Subaru WRX on a flat, stable surface.
- Engage the parking brake.
- Loosen the lug nuts on all four wheels slightly while the car is still on the ground.
Step 1: Lifting the Vehicle
Use the jack to lift the vehicle. Ensure that you lift it high enough to remove the wheels comfortably.
Once lifted, place jack stands under the vehicle for safety. Ensure the vehicle is secure before proceeding.
Step 2: Removing the Wheels
Now that the vehicle is secured, remove the lug nuts completely and take off the wheels. Set the wheels aside in a safe place.
Step 3: Cleaning the Hub Surface
Before installing the spacers, clean the hub surface with brake cleaner and a rag. This will ensure a proper fit and prevent any debris from causing issues.
Step 4: Installing the Wheel Spacers
Now, take your Motul wheel spacers and align them with the hub. Gently push them onto the hub until they sit flush against the surface.
Step 5: Replacing the Wheels
With the spacers installed, it’s time to put the wheels back on. Align the wheel holes with the spacer holes, and slide the wheel onto the hub.
Hand-tighten the lug nuts to secure the wheel. Ensure they are fitted correctly before moving on.
Step 6: Torqueing the Lug Nuts
Once all the wheels are on, use the torque wrench to tighten the lug nuts to the manufacturer’s specifications. This step is crucial for safety.
Step 7: Lowering the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once it’s on the ground, remove the jack stands.
Step 8: Final Checks
After lowering the vehicle, perform a final check on the lug nuts to ensure they are tightened properly. It’s also a good idea to check the clearance between the tires and the fenders.
Conclusion
Congratulations! You have successfully installed Motul wheel spacers on your Subaru WRX. Enjoy the enhanced performance and improved stance of your vehicle.