Step-by-step Installation Guide for the 13b-rew Swap Using Mazdaspeed Parts

by

The 13B-REW engine swap is a popular modification among Mazda enthusiasts, particularly for those who want to enhance the performance of their RX-7. This guide provides a step-by-step process for installing the 13B-REW engine using Mazdaspeed parts, ensuring you have all the necessary information to complete the swap successfully.

Tools and Materials Needed

Before starting the installation, gather all the necessary tools and materials. This will help streamline the process and minimize downtime.

  • 13B-REW engine
  • Mazdaspeed parts (turbo, intercooler, etc.)
  • Engine hoist
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Fuel line tools
  • Coolant and oil
  • Replacement gaskets and seals
  • Wiring harness

Preparation Steps

Proper preparation is crucial for a successful engine swap. Follow these steps to ensure everything is ready for the installation.

  • Disconnect the battery and remove it from the vehicle.
  • Drain the engine oil and coolant.
  • Remove the existing engine and transmission from the vehicle.
  • Inspect the engine bay for any damage or rust.
  • Clean the engine bay thoroughly to remove any debris.

Engine Removal

Once you have prepared the vehicle, it’s time to remove the old engine. Follow these steps to safely take out the engine.

  • Remove the intake and exhaust manifolds.
  • Disconnect all wiring harnesses from the engine.
  • Unbolt and remove the transmission from the engine.
  • Detach the engine mounts and support the engine with an engine hoist.
  • Carefully lift the engine out of the engine bay.

Installing the 13B-REW Engine

With the old engine removed, you can now install the 13B-REW engine. Follow these steps for a proper installation.

  • Position the 13B-REW engine in the engine bay using the hoist.
  • Align the engine mounts with the mounting points in the chassis.
  • Secure the engine mounts with bolts and torque them to the manufacturer’s specifications.
  • Reconnect the transmission to the engine and secure it with bolts.
  • Reinstall the intake and exhaust manifolds.

Connecting Mazdaspeed Parts

Integrating Mazdaspeed parts is essential for optimizing the performance of your new engine. Follow these steps to connect the necessary components.

  • Install the Mazdaspeed turbocharger and ensure proper alignment.
  • Connect the intercooler piping to the turbo and intake manifold.
  • Install the Mazdaspeed fuel injectors and connect the fuel lines.
  • Attach the wiring harness to the engine and ensure all connections are secure.
  • Install the Mazdaspeed oil cooler if applicable.

Final Steps and Testing

After connecting all components, you can proceed with the final steps before testing the engine.

  • Refill the engine oil and coolant.
  • Reconnect the battery and check all electrical connections.
  • Start the engine and monitor for any leaks or issues.
  • Allow the engine to reach operating temperature and check the performance.
  • Take the vehicle for a test drive to ensure everything is functioning properly.

Conclusion

The 13B-REW swap using Mazdaspeed parts can significantly enhance the performance of your Mazda RX-7. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your upgraded engine. Always remember to consult with a professional if you encounter any difficulties during the process.