Step-by-step Installation Guide for the Afe Momentum Cold Air Intake on the Grand Cherokee Srt

by

The AFE Momentum Cold Air Intake is a popular upgrade for the Grand Cherokee SRT, enhancing engine performance and efficiency. This step-by-step guide will walk you through the installation process, ensuring a smooth and successful upgrade.

Tools and Materials Needed

  • AFE Momentum Cold Air Intake Kit
  • Socket wrench set
  • Flathead screwdriver
  • Phillips screwdriver
  • Torque wrench
  • Clean cloth
  • Safety glasses

Preparation

Before starting the installation, ensure that you have all the necessary tools and materials at hand. Additionally, park the vehicle on a flat surface and turn off the engine. Allow the engine to cool down completely.

Step 1: Remove the Engine Cover

Using a socket wrench, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside in a safe location.

Step 2: Disconnect the Factory Air Intake

Locate the factory air intake system. Disconnect the mass airflow sensor (MAF) by gently pulling on the connector. Next, loosen the hose clamp using a flathead screwdriver and remove the intake tube from the throttle body.

Step 3: Remove the Factory Air Filter Box

Unbolt the factory air filter box from the chassis using a socket wrench. Carefully lift the box out, ensuring not to damage any surrounding components.

Step 4: Install the AFE Momentum Air Filter Box

Position the AFE Momentum air filter box into place. Secure it using the bolts you previously removed. Make sure it is firmly in place.

Step 5: Install the AFE Air Filter

Insert the AFE air filter into the new air filter box. Ensure it fits snugly and is seated properly.

Step 6: Connect the AFE Intake Tube

Attach the AFE intake tube to the throttle body, ensuring a secure fit. Tighten the hose clamp using a flathead screwdriver.

Step 7: Reconnect the Mass Airflow Sensor

Reconnect the mass airflow sensor connector to the AFE intake tube. Ensure it clicks into place securely.

Step 8: Double-Check Connections

Go through all connections and ensure everything is tight and secure. This includes checking the air filter, intake tube, and mass airflow sensor.

Step 9: Reinstall the Engine Cover

Place the engine cover back onto the engine bay and secure it with the bolts you removed earlier. Ensure it is properly aligned.

Step 10: Final Checks and Start the Engine

Before starting the engine, double-check that all tools are removed from the engine bay. Start the engine and listen for any unusual noises. If everything sounds normal, take the vehicle for a test drive to experience the enhanced performance.

Conclusion

Installing the AFE Momentum Cold Air Intake on your Grand Cherokee SRT can significantly improve performance and efficiency. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your new intake system.