Table of Contents
The Chevy El Camino is a classic vehicle that combines the utility of a truck with the performance of a muscle car. Upgrading the camshaft can significantly enhance the performance of your El Camino. In this article, we will provide a detailed, step-by-step installation guide for the Demon Motorsports camshaft.
Tools and Materials Needed
- Demon Motorsports Camshaft
- Socket set
- Torque wrench
- Screwdrivers
- Engine assembly lube
- Timing cover gasket
- Camshaft seal
- Oil filter
- Engine oil
- Safety glasses
- Mechanic’s gloves
Preparation Steps
Before starting the installation, ensure you have all the necessary tools and materials at hand. It is also essential to work in a well-ventilated area and wear safety gear.
1. Disconnect the Battery
To ensure safety during the installation process, disconnect the negative terminal of the battery. This will prevent any electrical shorts or shocks.
2. Remove the Engine Cover
Using a socket set, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside in a safe location.
3. Drain Engine Oil
Place a drain pan under the oil pan and remove the oil drain plug. Allow the oil to fully drain before replacing the plug.
Removing the Old Camshaft
4. Remove the Timing Cover
Unbolt the timing cover using the socket set, and gently pry it off. Be cautious not to damage the gasket.
5. Remove the Old Camshaft
Remove the timing chain or belt. Then, unbolt the camshaft retaining plate and carefully slide the old camshaft out of the engine.
Installing the Demon Motorsports Camshaft
6. Prepare the New Camshaft
Before installation, apply engine assembly lube to the journals and lobes of the new Demon Motorsports camshaft to ensure proper lubrication during initial startup.
7. Install the New Camshaft
Carefully slide the new camshaft into position, ensuring it aligns correctly with the timing chain or belt. Secure it with the retaining plate and torque the bolts to the manufacturer’s specifications.
8. Reinstall the Timing Chain or Belt
Reattach the timing chain or belt, ensuring it is properly aligned with the camshaft and crankshaft gears.
9. Replace the Timing Cover
Install a new timing cover gasket and carefully position the timing cover back in place. Bolt it down securely.
Final Steps
10. Replace Oil Filter and Add Oil
Replace the oil filter and refill the engine with fresh oil. Make sure to consult your owner’s manual for the correct oil type and capacity.
11. Reconnect the Battery
Reconnect the negative terminal of the battery, ensuring it is securely fastened.
12. Start the Engine
Start the engine and let it idle for a few minutes. Check for any leaks or unusual noises. If everything sounds good, take your El Camino for a test drive to experience the new performance enhancements!
Conclusion
Installing a Demon Motorsports camshaft on your Chevy El Camino can significantly boost performance. By following these steps carefully, you can ensure a successful installation. Enjoy the enhanced power and efficiency of your newly upgraded engine!