Table of Contents
The Volk TE37 wheels are renowned in the automotive community for their lightweight design and exceptional performance. Installing a set of 19-inch TE37s can significantly enhance your vehicle’s handling and aesthetics. This article provides a step-by-step guide for the installation process, including costs, time considerations, and the performance improvements you can expect.
Understanding the Volk TE37 Wheels
The Volk TE37 wheels are made from high-quality forged aluminum, providing both strength and reduced weight. These wheels are designed for performance enthusiasts who seek to improve their vehicle’s agility and responsiveness. Before starting the installation, it’s essential to understand the specifications and benefits of these wheels.
- Material: Forged aluminum
- Diameter: 19 inches
- Weight: Approximately 18-20 lbs per wheel
- Design: Classic 6-spoke design
Tools and Materials Needed
Before beginning the installation, gather the necessary tools and materials to ensure a smooth process. Here’s a list of what you’ll need:
- Jack and jack stands
- Tire iron or impact wrench
- Torque wrench
- New lug nuts (if required)
- Wheel cleaner
- Brake cleaner
Installation Steps
Step 1: Prepare Your Vehicle
Start by parking your vehicle on a flat surface and engaging the parking brake. This will ensure safety during the installation process. If possible, remove any wheel covers or hubcaps to access the lug nuts easily.
Step 2: Lift the Vehicle
Using a jack, lift the vehicle until the wheels are off the ground. Secure the vehicle with jack stands to prevent any accidents while you work. Ensure the vehicle is stable before proceeding.
Step 3: Remove the Old Wheels
Using a tire iron or impact wrench, loosen and remove the lug nuts from the existing wheels. Keep the lug nuts in a safe place, as you may need them if you decide to revert to the original wheels. Carefully remove the old wheels and set them aside.
Step 4: Clean the Wheel Hubs
Before installing the new wheels, clean the wheel hubs with brake cleaner to remove any dirt or debris. This will ensure a secure fit for the new wheels.
Step 5: Install the Volk TE37 Wheels
Align the holes of the Volk TE37 wheels with the wheel hubs and carefully slide the wheels onto the hubs. Make sure they are seated properly. Install the lug nuts by hand to avoid cross-threading.
Step 6: Tighten the Lug Nuts
Using a torque wrench, tighten the lug nuts to the manufacturer’s specified torque settings. This is crucial to ensure the wheels are securely attached and to prevent any issues while driving.
Step 7: Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once the vehicle is stable, you can perform a final check on the lug nut tightness to ensure everything is secure.
Step 8: Test Drive
After installation, take your vehicle for a short test drive. Pay attention to how the vehicle handles and listen for any unusual noises. This will help you confirm that the installation was successful.
Costs Involved
The cost of installing 19-inch Volk TE37s can vary based on several factors, including the price of the wheels, installation fees, and any additional parts you may need. Here’s a breakdown of potential costs:
- Volk TE37 Wheels: $2,000 – $3,000 for a set of four
- Lug Nuts: $50 – $100 (if required)
- Installation Fees: $100 – $200 (if using a professional service)
- Total Estimated Cost: $2,150 – $3,300
Time Required for Installation
The time required for the installation of Volk TE37 wheels can vary depending on your experience level and the tools available. Here’s an estimated time breakdown:
- Preparation: 15 – 30 minutes
- Lifting the Vehicle: 10 minutes
- Removing Old Wheels: 15 – 20 minutes
- Cleaning Wheel Hubs: 5 – 10 minutes
- Installing New Wheels: 20 – 30 minutes
- Tightening Lug Nuts: 10 minutes
- Lowering the Vehicle: 5 minutes
- Test Drive: 15 – 30 minutes
Overall, you can expect the installation process to take approximately 1.5 to 2.5 hours, depending on your familiarity with the steps involved.
Performance Improvements
Installing 19-inch Volk TE37s can lead to several performance improvements, making it a worthwhile investment for any car enthusiast. Here are some of the benefits:
- Improved Handling: The lightweight design enhances responsiveness during cornering.
- Better Acceleration: Reduced rotational mass allows for quicker acceleration.
- Enhanced Aesthetics: The sleek design adds a sporty touch to your vehicle.
- Increased Brake Performance: Better heat dissipation improves braking efficiency.
In conclusion, the step-by-step installation of 19-inch Volk TE37s is a manageable task that can significantly improve your vehicle’s performance and appearance. With the right tools and a little patience, you can enjoy the benefits of these high-quality wheels in no time.