Table of Contents
The Ram 1500 TRX is a beast of a truck, and for those looking to elevate its performance to an exhilarating level, installing a supercharger system can be a game changer. In this article, we will walk you through the step-by-step installation of a 1000 HP supercharger system for the Ram 1500 TRX.
Tools and Materials Needed
- Supercharger kit compatible with Ram 1500 TRX
- Socket set
- Wrenches
- Torque wrench
- Drill and drill bits
- Vacuum pump
- Cooling system fluid
- Oil for engine
- Safety goggles and gloves
Preparation Steps
Before starting the installation, ensure you have all the necessary tools and materials ready. It is crucial to work in a clean and organized environment to avoid losing any small parts during the installation process.
Additionally, make sure to disconnect the battery to prevent any electrical issues while working on the vehicle.
Step 1: Remove the Stock Components
Begin by removing the stock air intake system. This involves loosening the clamps and taking out the air filter and intake tube. Make sure to keep all screws and clamps in a safe place for reassembly.
Next, remove the stock throttle body. Disconnect any electrical connectors and carefully unbolt it from the intake manifold.
Step 2: Install the Supercharger Base Plate
Once the stock components are removed, it’s time to install the supercharger base plate. Align the base plate with the intake manifold and secure it using the provided bolts. Make sure to follow the torque specifications provided in the installation manual.
Step 3: Mount the Supercharger
Carefully lift the supercharger onto the base plate. Ensure that the alignment is correct before securing it with bolts. Again, refer to the torque specifications for proper tightening.
Step 4: Connect the Throttle Body
With the supercharger in place, reconnect the throttle body. Make sure that all electrical connectors are properly attached and that the throttle body is securely bolted to the supercharger.
Step 5: Install the Intercooler and Piping
The next step involves installing the intercooler. Position it in the designated area and secure it using the provided mounting hardware. Connect the piping from the supercharger to the intercooler and ensure all clamps are tightened properly.
Step 6: Connect the Intake System
Now, it’s time to connect the new intake system. Install the new air filter and intake tube according to the manufacturer’s instructions. Ensure that all connections are tight and secure.
Step 7: Install the Fuel System Upgrades
To support the increased power, you will need to upgrade the fuel system. Install larger fuel injectors and a high-flow fuel pump as per the supercharger kit instructions. Ensure all fuel lines are connected securely and without leaks.
Step 8: Connect the Cooling System
The supercharger will generate additional heat, so connecting the cooling system is essential. Install the coolant lines as directed and fill the system with the appropriate coolant fluid.
Step 9: Reconnect the Battery and Start the Engine
After ensuring that all components are securely installed, reconnect the battery. Start the engine and check for any leaks or issues. It is advisable to monitor the engine temperature and performance during this initial startup.
Step 10: Tune the Engine
To fully utilize the new supercharger system, an engine tune is necessary. This can be done using a tuning device or by visiting a professional tuner. Proper tuning will ensure optimal performance and reliability.
Conclusion
Installing a 1000 HP supercharger system on your Ram 1500 TRX can significantly enhance its performance and driving experience. By following these steps carefully, you can achieve impressive power gains and enjoy the thrill of driving a supercharged truck.